Kemppi MINARC 120 User Manual

EN
1
2 3
4
5
6 7 8
2.5 CONNECTING TO POWER SUPPLY MAINS
Theunithasamainscableandawallplug(Note!Minarc151(110V)is
deliveredwithoutaplug).Youcanndfuseandcablesizesintheendof
these instructions in Technical data.
2.6 FILLER MATERIALS AND EQUIPMENT
Seealso2.4.Maincomponents.Youcanuseallelectrodesintendedfor
welding with DC. Suitable electrode sizes for the unit are listed in the end of
these instructions in Technical data.
1. Use welding specications given on electrode package.
2. Check that you have selected the correct welding process before starting
to weld.
3. Check that welding cable and earth cable connections are tight. If a
connection is slack, it will result in voltage drop that will cause the
connection to heat.
4. Mount the electrode rmly in holder.
9
Minarc 150, 151, 150 VRD, 120/150 AU / © Kemppi Oy / 0901

Kemppi MINARC 120 Specifications

General

Brand	Kemppi
Model	MINARC 120
Category	Welding System
Language	English