HEPA MEDIA EXHAUST FILTER
The exhaust filter must be replaced when
it becomes dirty. The timing between
replacement intervals witl depend on the
use conditions the vacuum cleaner is
exposed to. The filter should be checked
when changing the dust bag. The filter
CANNOT be washed as it will lose its
dust trapping ability.
1. Remove filter cover by pressing the
release tab on the cover and rotating out
from vacuum cleaner.
Cover
Release Tab
Filter
Hepa Media
Exhaust Filter--
2. Remove the
filter cartridge
from cover.
3. Place new filter
cartridge into cover as
shown.
5. Rotate in until
cover snaps into
place.
lots
4. Replace the
filter cover by
placing bottom
tabs in slots.
=18 =
To Next Page
Loading...
