Release the handle by pressing down on
the handle release pedal with your foot and
pullingback and down on the handle with
yourhand.
HANDLEMOUNTED
Release
Pedal
To start the vacuum cleaner, slide the
On/Off switchfrom the OFF positionto the
ON position.To stop the vacuum cleaner,
slidethe On/Off switchto the OFF position.
Crevice
Dusting •Stretch
Hose
Combination
Hose
Identify each ofthe attachments shown
above.
TO USE ATTACHMENTS
Place the carpet/bare floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor setting.
See CARPET/BARE FLOOR SELECTOR
section.
When returning the bare floor selector to
the carpet setting, use caution as the selec-
tor can move quickly to that setting due to
tension created by the belt.
Remove the lower end of the stretch hose
from the cleaner by grasping the hose col-
lar, twisting and pulling straight out. The
attachments can now be added to the hose.
Note: The motor protector may open
when using attachments or when cleaning
new carpet, due to reduced airflow by the
attachments themselves or by new carpet
fuzz filling the dust bin quickly. See the
TROUBLESHOOTING section.
Electrical Shock And Personal Injury
Hazard
Disconnectelectricalsupply before
servicingor cleaning the unit. Failure
to do so could result in electricalshock
or personalinjuryfrom cleaner sud-
denly starting.
8
To Next Page
Loading...
