What to do if Kenmore 795.78546.801 Refrigerator defrosting is poor because the DOOR doesn't close properly?
If the defrosting in your Kenmore Refrigerator is poor, and the DOOR does not close properly, reassemble the DOOR.
Why is my Kenmore Refrigerator not defrosting properly?
If your Kenmore Refrigerator is not defrosting properly, it might be due to a blocked drain pipe. Remove any ice or impurities from the drain pipe to ensure proper defrosting.
What causes poor cooling in my Kenmore 795.78546.801?
If the cooling in your Kenmore Refrigerator is poor, it might be caused by a blocked passage of cool air. Remove any impurities that are obstructing the passage to improve cooling performance.
How to fix incorrect freezer temperature in Kenmore Refrigerator?
If your Kenmore Refrigerator's freezer temperature is incorrect, a potential cause is a faulty FAN MOTOR. Replacing the FAN MOTOR may resolve this issue.
How do I troubleshoot poor cooling in my Kenmore Refrigerator?
If the cooling in your Kenmore Refrigerator is poor, it could be due to a faulty FAN MOTOR. Replacing the FAN MOTOR may resolve the issue.
Why is the freezer temperature incorrect in my Kenmore 795.78546.801?
If your Kenmore Refrigerator's freezer temperature is incorrect, it may be due to a poor CONNECTING WIRE. Check the MOTOR and the connection of the black wire of the MAIN PWB CONNECTOR (CON1).
What to do if POWER SOURCE is poor due to applied voltage error in Kenmore 795.78546.801?
If the POWER SOURCE of your Kenmore Refrigerator is poor due to an applied voltage error, reconnect the CONNECTOR.
What to do if Kenmore 795.78546.801 Refrigerator COMPRESSOR is locked or blocked?
If your Kenmore Refrigerator's cooling is poor, and the COMPRESSOR is locked or blocked, replace the OLP and PTC.
Why is my Kenmore Refrigerator defrosting poorly due to a connection issue?
If the defrosting in your Kenmore Refrigerator is poor because the connection is poor, check the EVAPORATOR connection and the wire of MAIN PWB CONNECTOR.
What to do if Kenmore Refrigerator DEFROST-SENSOR is poor?
If the defrosting in your Kenmore Refrigerator is poor due to a faulty DEFROST-SENSOR, you should replace the DEFROST- SENSOR.
Essential safety guidelines before servicing the refrigerator.
Details on electrical ratings, no-load performance, and system specifications.
Physical dimensions of the refrigerator.
Visual identification of main refrigerator interior components.
List and diagram of icemaker components.
Identification of case and freezer compartment parts.
Identification of refrigerator and door components.
Identification of dispenser unit components.
Procedures for removing and replacing refrigerator doors.
Steps for removing and replacing the door gasket.
Instructions for detaching and removing the dispenser unit.
Guides for removing fan, defrost assembly, control box, etc.
Detailed procedure for removing and reinstalling the pullout drawer.
Explanation of compressor role, starter, and OLP.
Details on the TSD starter and OLP function.
Schematic diagrams of the refrigerator's main electrical circuits.
Troubleshooting steps for the compressor and electrical parts.
Diagnostic procedures for the TSD and OLP.
Troubleshooting for issues with other electrical components.
A chart for diagnosing complaints and their remedies.
Explanation of the refrigeration cycle and related issues.
Overview of the icemaker's operational sequence.
Specific functions and modes of the ice maker.
Error codes and diagnosis for the icemaker control panel.
General functions and user interface operations controlled by MICOM.
Diagrams and explanations of power, oscillation, and reset circuits.
Circuits for load driving, buzzer, and door open detection.
Circuitry for reading various temperature sensors.
Details on damper motor circuit and sensor resistance values.
Troubleshooting guide for MICOM-related problems.
Diagram and parts list for the main Printed Wiring Board (PWB).
General| Brand | Kenmore |
|---|---|
| Model | 795.78546.801 |
| Category | Refrigerator |
| Language | English |
To Next Page