To Next PageTo Next PageWhat to do if my Kenmore 795.78556800 is not cooling normally due to complete refrigerant leakage?
If your Kenmore Refrigerator's freezer and refrigerator aren't cooling normally because there's no refrigerant discharging, restoring the normal amount of refrigerant and repairing the leak should restore normal cooling.
What to do if the Kenmore 795.78556800 Refrigerator cooling operation stops periodically?
Cooling operation should restart when the inlet of the capillary tube is heated.
Crucial safety instruction to disconnect power before commencing any service work on the appliance.
Disclaimer regarding the intended audience and liability for repair attempts using this manual.
Details on voltage, current leakage, and energy consumption ratings for the refrigerator.
Performance data of the refrigerator under no-load conditions at different ambient temperatures.
Information on compressor capacity, pressure, and refrigerant type used in the system.
Required clearances for proper air circulation around the refrigerator during installation.
List of common replacement parts with their part numbers for service and repair.
Diagram illustrating the air flow and circulation within the refrigerator for cooling.
Detailed measurements of the refrigerator including width, depth, and height for installation purposes.
Step-by-step instructions for safely removing and reinstalling the refrigerator doors.
Procedure for removing and replacing the door gasket, including clips and channel insertion.
Instructions for removing the dispenser unit from the refrigerator, detailing the steps involved.
Guide to adjust the refrigerator doors to ensure they close properly and are aligned.
Procedure for removing and replacing the fan and fan motor assembly within the refrigerator.
Instructions for removing and replacing the defrost control assembly and its associated components.
Steps for replacing the refrigerator compartment and freezer compartment lamps.
Procedure for removing and replacing the main refrigerator control box.
Instructions for removing and replacing the multi duct component.
Detailed steps for removing and reinstalling the freezer pullout drawer and its associated components.
Procedure for assembling and disassembling trim kits and door glass for specific refrigerator models.
Explanation of the compressor's function and important notes for safe handling and repair.
Details on the TSD starter, its application, and electrical considerations for proper operation.
Definition and role of the Overload Protector in safeguarding the compressor motor.
Diagnostic steps for issues related to the compressor and its associated electrical components.
Troubleshooting procedures for the TSD starter and Overload Protector (OLP).
Diagnosing problems with other electrical components like starting devices, coils, and wiring harnesses.
A chart detailing common complaints, points to check, and recommended remedies for service.
Troubleshooting chart based on the state of the unit and evaporator for refrigeration cycle issues.
Flowchart for diagnosing 'Not Cooling' complaints, isolating issues within the sealed system.
Explanation of the ice maker's operational cycle from power on to park position.
Details on ice maker functions like start position, ice making mode, harvest mode, and fill/park position.
Information on diagnosing defects and error codes related to the ice maker's water supply control panel.
Covers basic functions, temperature mode, lock, filter, and special features of the Micom system.
Details on PCB functions including power, oscillation, reset, load drive, and temperature sensor circuits.
Specifications for the resistance values of various sensors at different temperature points.
Diagram and list of components for the main Printed Circuit Board (PWB) assembly.
Crucial safety instruction to disconnect power before commencing any service work on the appliance.
Disclaimer regarding the intended audience and liability for repair attempts using this manual.
Details on voltage, current leakage, and energy consumption ratings for the refrigerator.
Performance data of the refrigerator under no-load conditions at different ambient temperatures.
Information on compressor capacity, pressure, and refrigerant type used in the system.
Required clearances for proper air circulation around the refrigerator during installation.
List of common replacement parts with their part numbers for service and repair.
Diagram illustrating the air flow and circulation within the refrigerator for cooling.
Detailed measurements of the refrigerator including width, depth, and height for installation purposes.
Step-by-step instructions for safely removing and reinstalling the refrigerator doors.
Procedure for removing and replacing the door gasket, including clips and channel insertion.
Instructions for removing the dispenser unit from the refrigerator, detailing the steps involved.
Guide to adjust the refrigerator doors to ensure they close properly and are aligned.
Procedure for removing and replacing the fan and fan motor assembly within the refrigerator.
Instructions for removing and replacing the defrost control assembly and its associated components.
Steps for replacing the refrigerator compartment and freezer compartment lamps.
Procedure for removing and replacing the main refrigerator control box.
Instructions for removing and replacing the multi duct component.
Detailed steps for removing and reinstalling the freezer pullout drawer and its associated components.
Procedure for assembling and disassembling trim kits and door glass for specific refrigerator models.
Explanation of the compressor's function and important notes for safe handling and repair.
Details on the TSD starter, its application, and electrical considerations for proper operation.
Definition and role of the Overload Protector in safeguarding the compressor motor.
Diagnostic steps for issues related to the compressor and its associated electrical components.
Troubleshooting procedures for the TSD starter and Overload Protector (OLP).
Diagnosing problems with other electrical components like starting devices, coils, and wiring harnesses.
A chart detailing common complaints, points to check, and recommended remedies for service.
Troubleshooting chart based on the state of the unit and evaporator for refrigeration cycle issues.
Flowchart for diagnosing 'Not Cooling' complaints, isolating issues within the sealed system.
Explanation of the ice maker's operational cycle from power on to park position.
Details on ice maker functions like start position, ice making mode, harvest mode, and fill/park position.
Information on diagnosing defects and error codes related to the ice maker's water supply control panel.
Covers basic functions, temperature mode, lock, filter, and special features of the Micom system.
Details on PCB functions including power, oscillation, reset, load drive, and temperature sensor circuits.
Specifications for the resistance values of various sensors at different temperature points.
Diagram and list of components for the main Printed Circuit Board (PWB) assembly.
General| Brand | Kenmore |
|---|---|
| Model Number | 795.78556800 |
| Type | French Door |
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Finish | Stainless Steel |
| Energy Star Certified | Yes |
| Width | 35.75 in. |
| Height | 69.875 in. |
