Kenmore 795.78509800 - User Manual

CAUTION
BEFORE SERVICING THE UNIT,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
REFRIGERATOR
SERVICE MANUAL
R
Model #s:
795.78502800
795.78503800
795.78506800
795.78509800
795.78512800
795.78513800
795.78516800
795.78519800
P/No. MFL47914901 (Last Revision: M . 10. 2008)

Summary

1. SPECIFICATIONS

1-1 DISCONNECT POWER CORD BEFORE SERVICING

Safety procedure for electrical work, emphasizing disconnecting power.

1-2 IMPORTANT NOTICE

Disclaimer regarding user expertise and manufacturer liability.

1-3 ELECTRICAL SPECIFICATIONS

Technical details on voltage, current, and energy consumption.

1-4 NO LOAD PERFORMANCE

Performance characteristics under no-load conditions.

1-5 REFRIGERATION SYSTEM

Information on compressor capacity, pressure, and refrigerant.

1-6 INSTALLATION

Clearance requirements for proper air circulation during installation.

1-7 REPLACEMENT PARTS

List of common replacement parts with part numbers.

1-8 AIR FLOW; CIRCULATION DAIR

Diagram illustrating the internal air circulation paths.

2. PARTS IDENTIFICATION

3. DISASSEMBLY

3-1 REMOVING AND REPLACING REFRIGERATOR DOORS

Procedure for removing and replacing refrigerator doors.

3-2 DOOR

Steps for door gasket removal and replacement.

3-3 DOOR ALIGNMENT

Instructions on how to align the refrigerator doors.

3-4 FAN AND FAN MOTOR(EVAPORATOR)

Procedure for removing the evaporator fan and motor assembly.

3-5 DEFROST CONTROL ASSEMBLY

Steps for replacing the defrost control assembly.

3-6 LAMP

Instructions for changing refrigerator and freezer interior lamps.

3-7 MULTI DUCT

Procedure to remove the multi duct component.

3-8 MAIN PWB

Procedure for replacing the main Printed Wiring Board (PWB).

3-9 DISPENSER

Steps for disassembling the water dispenser.

3-10 DISPLAY PWB REPLACEMENT

Procedure for replacing the display Printed Wiring Board (PWB).

3-11 FUNNEL REPLACEMENT

Procedure for replacing the dispenser funnel.

3-12 SUB PWB FOR WORKING DISPENSER

Procedure for replacing the dispenser sub PWB.

3-13 DUCT DOOR REPLACEMENT

Procedure for replacing the duct door.

3-14 ICE CORNER DOOR REPLACEMENT

Procedure for replacing the ice corner door.

3-15 ICEMAKER ASSEMBLY

Procedure for replacing the icemaker assembly.

3-16 AUGER MOTOR COVER

Procedure for removing the auger motor cover.

3-17 HOW TO REMOVE A DOOR ICE BIN

Steps for removing the door ice bin.

3-18 HOW TO INSERT A DOOR ICE BIN

Steps for inserting the door ice bin.

3-19 HOW TO REMOVE AND REINSTALL THE PULLOUT DRAWER

Step-by-step guide for pullout drawer removal and reinstallation.

3-20 WATER VALVE DISASSEMBLY METHOD

Procedure for disassembling the water valve.

3-21 FAN AND FAN MOTOR DISASSEMBLY METHOD

Procedure for disassembling the fan and fan motor.

3-22 PULL OUT DRAWER

Detailed steps for operating the pullout drawer.

4. ADJUSTMENT

4-1 COMPRESSOR

Role, composition, and usage notes for the compressor.

4-2 PTC-STARTER

Composition, role, and usage guidelines for the PTC starter.

4-3 OLP (OVERLOAD PROTECTOR)

Definition and function of the Overload Protector (OLP).

4-4 TO REMOVE THE COVER PTC

Procedure for removing the PTC cover.

5. CIRCUIT DIAGRAM

6. TROUBLESHOOTING

6-1 COMPRESSOR AND ELECTRIC COMPONENTS

Troubleshooting steps for compressor and related electric components.

6-2 OTHER ELECTRICAL COMPONENTS

Troubleshooting guide for other electrical parts.

6-3 SERVICE DIAGNOSIS CHART

Diagnostic chart for common cooling complaints.

6-4 REFRIGERATION CYCLE

Troubleshooting chart for refrigeration cycle issues.

6-4-1 SEALED SYSTEM DIAGNOSIS

Diagnostic flow for sealed system problems.

7. OPERATION PRINCIPLE AND REPAIR METHOD OF ICEMAKER

7-1 OPERATION PRINCIPLE

Overview of the icemaker's operational principle.

7-2 ICE MAKER FUNCTIONS

Detailed explanation of icemaker modes and functions.

7-3 DEFECT DIAGNOSIS FUNCTION

Error codes and diagnostic procedures for the ice maker.

8. DESCRIPTION OF FUNCTION & CIRCUIT OF MICOM

8-1 FUNCTION

Description of general functions, controls, and display modes.

8-2 PCB FUNCTION

Description of the Printed Circuit Board (PCB) and its circuits.

8-3 TROUBLESHOOTING

Troubleshooting specific to MICOM-controlled functions.

8-4 MAIN PWB ASSEMBLY AND PARTS LIST

Details of the main PWB assembly and its components list.

CASE PARTS

FREEZER PARTS

REFRIGERATOR PARTS

DOOR PARTS

DISPENSER PARTS

ICE MAKER & ICE BANK PARTS

Kenmore 795.78509800 Specifications

General

Brand	Kenmore
Model	795.78509800
Category	Refrigerator
Language	English