To Next PageTo Next PageWhat to do if my Kenmore 795.78543800 is not cooling normally due to complete refrigerant leakage?
If your Kenmore Refrigerator's freezer and refrigerator aren't cooling normally because there's no refrigerant discharging, restoring the normal amount of refrigerant and repairing the leak should restore normal cooling.
What to do if the Kenmore 795.78543800 Refrigerator cooling operation stops periodically?
Cooling operation should restart when the inlet of the capillary tube is heated.
General| Brand | Kenmore |
|---|---|
| Model | 795.78543800 |
| Category | Refrigerator |
| Language | English |
Important safety instructions to follow before servicing the refrigerator.
Essential step to disconnect power before servicing for safety.
Disclaimer regarding experience required for repairs and manufacturer liability.
Details on temperature control, defrost, electrical rating, and energy consumption.
Performance data under no-load conditions at different ambient temperatures.
Specifications for compressor capacity, pressure, and refrigerant.
Clearance requirements for air circulation during installation.
List of common replacement parts with part numbers.
Diagram illustrating air flow and circulation within the refrigerator.
Table detailing the physical dimensions of the refrigerator.
Diagram labeling major internal and external refrigerator components.
Step-by-step instructions for removing and replacing refrigerator doors.
Critical safety warning about electrical hazards and physical injury during service.
Instructions for removing and replacing door gaskets.
Procedure for removing the dispenser unit from the refrigerator.
Steps to adjust refrigerator doors for proper alignment and sealing.
Steps to remove and disassemble the fan and fan motor assembly.
Procedure for removing and replacing the defrost control assembly.
Instructions for removing and replacing the refrigerator compartment lamp.
Steps for removing the refrigerator control box.
Procedure for removing the multi duct component.
Step-by-step guide for removing the pullout drawer.
Step-by-step guide for reinstalling the pullout drawer.
Instructions for separating and installing the pullout drawer.
Procedure for disassembling the left door glass and display.
Steps to remove components of the freezer door and glass.
Explains the role and composition of the compressor, including usage notes.
Details the TSD starter's application, function, and electrical considerations.
Defines and explains the role of the Overload Protector (OLP).
Schematic diagram illustrating the electrical connections of the refrigerator.
Troubleshooting flowchart for compressor and related electrical components.
Troubleshooting steps for TSD starter and Overload Protector (OLP).
Troubleshooting guide for other electrical components like fan motors and defrost systems.
Chart correlating complaints with points to check and remedies.
Troubleshooting chart for common refrigeration cycle issues like leaks and clogs.
Diagnostic flowchart for 'Not Cooling' complaints related to the sealed system.
Explains the operational steps of the icemaker from power on to test mode.
Details the functions of the icemaker, including start position and ice making mode.
Explains the fill/park position and water supply amount table.
Describes the compulsory function test for service and diagnosis.
Details error codes related to the ice maker's water supply control panel.
Overview of the refrigerator's basic functions and settings.
Instructions for changing temperature display between Fahrenheit and Celsius.
Explanation of the lock function for the dispenser and control panel.
Describes the water filter replacement indicator and reset procedure.
Explains the Ultra Ice function for faster freezing and increased ice production.
Details the control of the freezer fan motor speeds and operation.
Explains the purpose, activation, and operation of the Ultra Ice function.
Describes the automatic shut-off function for the refrigerator lamp.
Explains the open door alarm function and its audible alerts.
Describes the buzzer sound produced when front display buttons are pressed.
Explains the initiation, timing, and termination of the defrost cycle.
Details the water filter replacement indication and reset process.
Explains the dispenser light modes: normal and continuous ON.
Explains how automatic diagnosis simplifies servicing and displays error codes.
Details how to operate the test mode for checking PCB and product functions.
Describes the power circuit and voltage distribution for various components.
Explains the oscillation circuit's role in generating base clocks for the MICOM.
Describes the reset circuit for initializing functions and the MICOM.
Details circuits for load/buzzer drive and open door detection.
Explains the temperature sensor circuit and their resistance specifications.
Describes the circuit for the stepping motor that controls the damper.
Provides resistance specifications for various temperature sensors.
Troubleshooting steps for issues related to poor power source.
Troubleshooting steps for poor cooling performance, including compressor issues.
Troubleshooting steps for incorrect freezer temperature.
Troubleshooting steps for cooling issues related to fan motor and air flow.
Troubleshooting steps for problems with the defrosting system.
Diagram showing the layout of components on the Main PCB.
List of parts for the icemaker assembly with corresponding numbers.
Exploded view diagram of various case parts with position numbers.
Detailed list of case parts with part numbers and descriptions.
Exploded view diagram of freezer parts with position numbers.
Exploded view diagram of refrigerator parts with position numbers.
Detailed list of refrigerator parts with part numbers and descriptions.
Exploded view diagram of door parts with position numbers.
Detailed list of door parts with part numbers and descriptions.
Detailed list of door parts with part numbers and descriptions.
Exploded view diagram of dispenser parts with position numbers.
Detailed list of dispenser parts with part numbers and descriptions for specific models.
