To Next PageTo Next PageWhat to do if my Kenmore Refrigerator cooling is poor?
If your Kenmore Refrigerator's cooling is poor, it could be due to refrigerant leakage. In this case, replace the leaking part and replenish the lost refrigerant to restore proper cooling.
Why is my Kenmore 795.78542.801 not defrosting properly?
If your Kenmore Refrigerator is not defrosting properly, it might be due to a blocked drain pipe. Remove any ice or impurities from the drain pipe to ensure proper defrosting.
What causes poor cooling in my Kenmore 795.78542.801 Refrigerator?
If the cooling in your Kenmore Refrigerator is poor, it might be caused by a blocked passage of cool air. Remove any impurities that are obstructing the passage to improve cooling performance.
How to fix incorrect freezer temperature in Kenmore 795.78542.801?
If your Kenmore Refrigerator's freezer temperature is incorrect, a potential cause is a faulty FAN MOTOR. Replacing the FAN MOTOR may resolve this issue.
How do I troubleshoot poor cooling in my Kenmore Refrigerator?
If the cooling in your Kenmore Refrigerator is poor, it could be due to a faulty FAN MOTOR. Replacing the FAN MOTOR may resolve the issue.
Why is the freezer temperature incorrect in my Kenmore 795.78542.801 Refrigerator?
If your Kenmore Refrigerator's freezer temperature is incorrect, it may be due to a poor CONNECTING WIRE. Check the MOTOR and the connection of the black wire of the MAIN PWB CONNECTOR (CON1).
What causes incorrect freezer temperature in my Kenmore Refrigerator if the door liner is damaged?
If the freezer temperature in your Kenmore Refrigerator is incorrect, it could be due to a damaged door liner. Replacing the door liner may resolve this issue.
How to fix poor cooling in Kenmore 795.78542.801 if the door liner is damaged?
If the cooling in your Kenmore Refrigerator is poor, and the door liner is damaged, replace the Door liner.
How to fix poor defrosting due to TEMPERATURE FUSE disconnection in Kenmore 795.78542.801 Refrigerator?
If the defrosting in your Kenmore Refrigerator is poor, and the TEMPERATURE FUSE is disconnected, you should replace the TEMPERATURE FUSE.
What to do if Kenmore 795.78542.801 DEFROST-SENSOR is poor?
If the defrosting in your Kenmore Refrigerator is poor due to a faulty DEFROST-SENSOR, you should replace the DEFROST- SENSOR.
General| Brand | Kenmore |
|---|---|
| Model | 795.78542.801 |
| Category | Refrigerator |
| Language | English |
Essential safety guidelines to follow before servicing the refrigerator.
Details electrical ratings, current leakage, and energy consumption.
Describes performance under no-load conditions at different ambient temperatures.
Provides data on compressor capacity, pressure, and refrigerant.
Specifies required clearances for air circulation around the unit.
Identifies major parts inside the refrigerator compartments.
Lists parts located on the refrigerator doors.
Step-by-step guide for removing and installing refrigerator doors.
Instructions for removing and fitting the door gasket.
Steps to detach the dispenser unit from the refrigerator.
Procedure for removing the internal fan and its motor.
Guide for removing the defrost control components.
Steps to remove the refrigerator's main control box.
Instructions for removing the multi duct component.
Detailed steps for removing and reinstalling the freezer pullout drawer.
Explains the compressor's function and important usage precautions.
Details the TSD starter's role and its applied circuit diagram.
Describes the OLP's function in protecting the compressor motor.
Illustrates the wiring for the main and display control boards.
Shows the electrical connections for the icemaker unit.
Diagnosing issues with the compressor and related electrical parts.
Steps for diagnosing problems with the TSD starter and OLP.
Troubleshooting common issues with various electrical components.
A chart correlating complaints with points to check and remedies.
Diagnosing problems related to the refrigerant cycle and its components.
Flowchart for diagnosing issues within the sealed refrigeration system.
Explains the functional stages of the icemaker.
Details the icemaker's functions, including start, icemaking, and harvest modes.
Procedures for testing icemaker functions and diagnosing error codes.
Overview of the refrigerator's control functions and display.
How to switch between Fahrenheit and Celsius temperature displays.
How to lock and unlock the dispenser and control panel.
Information on the water filter replacement indicator.
Explanation of the Ultra Ice function for faster freezing.
How the freezer fan motor speed is controlled.
Describes the audible alarm for an open refrigerator or freezer door.
Details the initiation and termination of the defrost cycle.
How the refrigerator performs automatic error detection and display.
Instructions for operating various test modes for diagnostics.
Details the power supply circuit for various components.
Explains the circuit responsible for generating the system clock.
Describes the circuit that initializes the system upon power restoration.
Circuitry for controlling loads and detecting open doors.
Details the circuit for reading temperature sensors and their expected values.
Circuit for the motor controlling the damper in the refrigeration compartment.
Illustrated list of parts for the icemaker assembly.
Exploded view and list of external case components.
Detailed part numbers for refrigerator interior components.
Illustrated breakdown of refrigerator door components.
List and diagram of dispenser unit parts.
