To Next PageTo Next PageWhat to do if my Kenmore 795.78546800 is not cooling normally due to complete refrigerant leakage?
If your Kenmore Refrigerator's freezer and refrigerator aren't cooling normally because there's no refrigerant discharging, restoring the normal amount of refrigerant and repairing the leak should restore normal cooling.
What to do if the Kenmore 795.78546800 cooling operation stops periodically?
Cooling operation should restart when the inlet of the capillary tube is heated.
General| Brand | Kenmore |
|---|---|
| Model | 795.78546800 |
| Category | Refrigerator |
| Language | English |
Crucial safety step before performing any service on the appliance.
General disclaimer regarding liability and user experience.
Technical details including voltage, current leakage, and energy consumption.
Performance benchmarks for refrigerator and freezer compartments at no load.
Data on minimum compressor capacity and system pressures.
Required clearances for proper ventilation and installation of the unit.
A list of common replacement part numbers for the appliance.
Diagram illustrating the internal air circulation system for cooling.
Detailed physical dimensions of the refrigerator in various configurations.
Step-by-step procedure for safely removing and reinstalling refrigerator doors.
Instructions for removing and replacing the door gasket and its components.
Guide for safely removing the water or ice dispenser unit from the door.
Method for adjusting doors to ensure proper sealing and alignment.
Procedure for removing and servicing the internal fan and motor assembly.
Steps to remove and replace the defrost sensor and fuse components.
Instructions for replacing interior compartment lamps.
Procedure for accessing and removing the main refrigerator control box.
Steps to remove and disconnect the multi-duct component.
Detailed instructions for removing and reinstalling the freezer drawer assembly.
Method for assembling/disassembling specific trim kits and door glass components.
Role, composition, and usage notes for the compressor unit.
Information on the TSD starter, its function, and circuit application.
Definition, function, and internal structure of the Overload Protector.
Troubleshooting guide for compressor and electrical component failures.
Diagnostic steps for TSD starter and Overload Protector issues.
Troubleshooting common problems with fans, sensors, and wiring.
A chart correlating specific complaints with diagnostic checks and remedies.
Troubleshooting chart for refrigerant leaks, clogs, and compressor performance.
Flowchart for diagnosing problems within the sealed refrigeration system.
Overview of the icemaker's operational stages from power on to harvest.
Detailed explanation of icemaker modes like start, ice making, and harvest.
Explanation of water fill stages and the park position in the icemaker cycle.
Procedure for performing functional tests and diagnosis on the icemaker.
Guide for identifying and diagnosing icemaker defects using error codes.
Description of the refrigerator's control panel functions, temperature settings, and modes.
Explanation of the main PCB's circuits, including power, oscillation, and reset.
Common troubleshooting steps for power, cooling, and temperature issues.
Diagram and part listing for the main Printed Circuit Board assembly.
