EasyManua.ls Logo

KENT 1015 - Page 16

KENT 1015
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hot Water Cleaner Batch 1015-1030
Date: 18/04-2017
User Guide
Page: 16 of 36
Kent high pressure\Hot Water 1015-1030\Brugs-Hedvand-EN-e.237.doc
7. The hot water cleaner must not be covered as the exhaust gases
emitted will be very hot.
8. If necessary, make sure that there is good exhaust gas ventilation.
9. Never direct the water jet towards yourself, other people or animals.
Cleaning of clothes.
10. Avoid spraying electrical wiring and installations.
11. Be careful around sensitive and expensive installations.
12. Avoid cleaning parts that have contact with food.
13. Use only approved cleaning agents that are designed for hot water
cleaning.
14. Dispose of empty packaging at an approved local authority waste
reception centre.
15. If necessary, use respiration equipment if there is a risk of inhaling
harmful vapours. See the hazard class shown on the cleaning agent
packaging.
16. Frost may result in pipes bursting, immediately destroying the hot
water cleaner. The machine must always be stored in a frost-free
location. If this is not possible, protect the machine against the
effects of frost as described in the next section of the User Guide.
17. Hot water cleaning in freezing weather requires immediate start-up,
after which the hot water must be use immediately. Please note that
cleaning may cause ice accretion.
18. Never leave the hot water cleaner running unsupervised.
19. If necessary, the hot water cleaner can be prevented from moving
using stop chocks.
20. Nobody must be present under a hot water cleaner that is being
lifted.
21. Any repair or adjustment must only be carried out once steps have
been taken to ensure that the main power is secured against
unintentional start, e.g. disconnect the plug from the power
socket.
22. Incorrect installation and handling may result in serious accidents.
Changes to the machine's functionality are made at your own risk. Deterioration of health and safety
functions may put the owner of the machine in a legally untenable position, particularly where changes
or decisions taken have resulted in personal injury. As a rule, significant changes require a new CE
marking on the hot water cleaner.