2. Accidents would be greatly reduced if proper working lights were to be set up
around the work site.
3. Only trained personnel may remain in the vicinity of the hot water cleaner
whilst it is in operation.
4. This User Guide must be available to everyone who uses the tools.
5. The hot water cleaner and high-pressure washer must not be used if there
are faults in safety-related devices - overpressure valves, thermostats or
mechanical parts that may cause scalding. All electrical connections must
be waterproof.
6. High pressure hoses and lances must be of an approved type and free of defects.
1. Always wear protective equipment as described in the work instructions. Use suitable work cloth-
ing, safety goggles, gloves, safety footwear, respiratory equipment and ear defenders. Take the
health and safety of fellow workers into account. Never use the spray to clean boots or protective
clothing.
To Next Page
Loading...