KENT 1015 - Declaration of Conformity, Hot Water Cleaner - Mobile en

Hot Water Cleaner Batch 1015-1030
Date: 18/04-2017
User Guide
Page: 3 of 36
 Kent high pressure\Hot Water 1015-1030\Brugs-Hedvand-EN-e.237.doc
EC-DECLARATION OF CONFORMITY FOR MACHINERY
Manufacturer: KENT HØJTRYK A/S
Skovbrynet 10
DK - 6752 Glejbjerg
Tel: +45 75 26 73 00
Hereby declare that:
Hot Water Cleaners
Model: 1015: 1016: 1018: 1018S: 1019: 1019S:
1020: 1020S: 1021: 1025: 1030:
Manufacturing no.: Year:
Is manufactured in conformity with:
Provision in the Council Directive of 17. May 2008 on mutual approximation of the laws of the
Member States on the safety of machines (2006/42/EC) with special reference to Annex II, A and
Annex I, of the Directive on essential safety and health requirements in relation to construction and
manufacture of machines.
Provision in the Council Directive of 12. December 2006 on mutual approximation of the laws of the
Member States on electrical equipment intended for apply to some tension limits (2006/95/EC).
Provision in the Council Directive of 15. December 2004 on mutual approximation of the laws of the
Member States on electromagnetic compatibility (2004/108/EC).
Is manufactured in conformity with following national / international standards and technical
specifications:
DS/EN 60335-2-79 Safety - Particular requirements for high pressure cleaneres and stem cleaners. 2009-11-17
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
DS/EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Ove Jørgensen Date: 18/4-2017
(Sign)