Kenwood Chef KVC51 User Manual (English)

Questions and Answers:

K
Kristin SampsonAug 13, 2025
What to do if my Kenwood Chef KVC51 stops during operation?
- J
  Justin ConleyAug 13, 2025
  If your Kenwood Mixer stops during operation, it may be due to overload protection or the overheat system being activated, possibly because the maximum capacity has been exceeded. First, unplug the mixer and check for any obstructions or overloading. Turn the speed control to “O” and then restart. If it doesn't work, reduce the ingredients to lighten the load and try again. If the issue persists, unplug the mixer and let it stand for 15 minutes, then plug it back in and reselect the speed. If the mixer still doesn't restart, no answer.
S
Shelley MillerAug 17, 2025
How to adjust Kenwood Chef KVC51 Mixer beater height?
- C
  Christopher GriffinAug 17, 2025
  If the whisk or K-beater on your Kenwood Mixer knocks against the bottom of the bowl or doesn't reach the ingredients, it's likely that the tool is at the wrong height and needs adjustment. Adjust the height using a suitable spanner – see “Tool Adjustment” section.
S
Sarah MitchellAug 20, 2025
Why can't I fit the slow speed attachment on my Kenwood Mixer?
- R
  Ryan WoodAug 20, 2025
  To fit the slow speed attachment on your Kenwood Mixer, ensure that the attachment has the KAX twist connection system to fit the outlet. If your attachments feature the Bar Connection System, you’ll need to use the KAT002ME adapter to connect them to the Twist Connection System. For more information visit www.kenwoodworld.com/twist.
A
Amanda Lewis MDAug 25, 2025
What to do if my Kenwood Kitchen Appliances stops and the standby light is flashing?
- J
  Jasmine AlvaradoAug 25, 2025
  If your Kenwood Kitchen Appliances stops during operation and the standby light flashes rapidly, it indicates that the overload protection or overheat system has been activated, or the maximum capacity has been exceeded. Unplug the appliance and check for any obstructions or overloading. Turn the speed control to 'O' and then restart. If it still won't operate, remove some ingredients to reduce the load and restart. If the problem persists, unplug the machine and let it stand for 15 minutes before plugging it back in and reselecting the speed. If it still doesn't restart, contact customer care.
T
Taylor MunozAug 28, 2025
Why is the standby light flashing on my Kenwood Kitchen Appliances when I plug it in?
- J
  Joshua WhiteAug 28, 2025
  If the standby light is flashing when your Kenwood Kitchen Appliances is first plugged in, it means that the speed control is not in the ‘O’ position, or the mixer head is in the raised position or not locked down correctly. To resolve this, check that the speed control is in the ‘O’ position and ensure that the Kitchen Machine head is locked down correctly.
T
Tami JonesSep 1, 2025
How to adjust a Kenwood Kitchen Appliances beater that knocks the bowl?
- S
  Steven BautistaSep 1, 2025
  If the whisk or K-beater knocks against the bottom of the bowl or does not reach the ingredients in the bottom of the bowl, the tool is at the wrong height and needs adjusting. Adjust the height using a suitable spanner – see “Tool Adjustment” section.
A
andersoncodySep 4, 2025
Why is the standby light off on my Kenwood Kitchen Appliances?
- J
  jeremylandrySep 4, 2025
  If the standby light is off while your Kenwood Kitchen Appliances is plugged in, it means the machine has been left plugged in for more than 30 minutes without being operated and has entered Standby mode. Press the Standby button once to reset it.
T
Tony MartinezSep 8, 2025
What to do if slow speed attachment cannot be fitted to Kenwood Kitchen Appliances?
- I
  Isabel GarciaSep 9, 2025
  If a slow speed attachment cannot be fitted, first check that your attachment is compatible with your model. The attachment must have the KAX twist connection system to fit the outlet. If you own attachments featuring the Bar Connection System, you will need to use the KAT002ME adapter to connect these to the Twist Connection System on your Kitchen Machine.