Setup
64
Ñ Change the wallpaper image or
color
1
Touch [Wallpaper Customize] in the
Display & Button setting menu.
2
Select an image.
*
2
*
1
*
3
*
1
The album art currently being displayed is
used as a wallpaper.
*
2
Select a wallpaper color in advance.
*
3
Select an original image in advance.
To select wallpaper color
1
Touch [Wallpaper Color] on the Wallpaper
Customize screen.
2
Select a wallpaper color.
■ [User]
You can set the color created with the RGB
color mixer. For how to create an original
color, see To register an original color
(P.63).
■ [Car Color]
This can be selected when the iDatalink
(commercially available) is connected.
■ [Button Illumination Synch] *
1
The color you have selected at [Button
Illumination Color] can be set. If you adjust
the color value with the following RGB color
mixer, the adjusted color will be applied to
the wallpaper and the button illumination.
For how to set the button illumination
color and create an original color, see
Customizing the button color (P.63).
“ON”/“OFF” (default)
*1 When [Button Illumination Color] is
“Variable”, this option is fixed to OFF.
3
Touch [ ].
To register an original image
With “KENWOOD Portal APP” application
installed on your iPhone or Android
smartphone, you can upload image files to this
unit and set an image as the wallpaper image.
See Importing Image Files (P.15).
User Interface Setup
You can setup user interface parameters.
1
Press the [HOME]/[ ] button.
2
Touch [ ].
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [User Interface].
User Interface setting menu appears.
5
Set each parameter as follows.
■ [Source Setup - Remote Control]
Select the sources to be switched with the
remote controller. For how to operate the
remote controller, see Basic Operation
(P.80).
To Next Page
Loading...
Need help?
General
