Kenwood DMX1057XR User Manual

Other External Components
59English
Ñ Display the dashboard camera
screen
1
Press the [MENU]/[ATT] button.
 Popup menu appears.
2
Touch [Camera].
3
1
2
1
Camera Switching Keys
Touch to switch the view camera. It is
necessary to set “Camera Assignment
Settings” beforehand except “Rear”. See To
set up the camera assignment settings
(P.57).
2
Camera off
Touch to exit the camera screen.
3
Key display
Touch to display the dashboard camera
control keys.
External audio/video players
(AV-IN)
1
Connect an external component to the AV
Audio input and the Video input terminal.
(P.91)
2
Select [AV-IN] as the source. (P.10)
3
Turn on the connected component and
start playing the source.
NOTE
• To select the AV-IN source, it is necessary to set
“VIDEO IN” to “None” in [Camera Assignment
Settings]. (P.57)
HDMI source
1
Connect your smartphone to the HDMI
input terminal. (P.91)
Use HDMI cable KCA-HD100 (optional
accessory).
2
Select [HDMI] as the source. (P.10)
3
Start an application or playback on your
smartphone.

Kenwood DMX1057XR Specifications

General

Resolution	1280 x 720
HDMI Input	Yes
HD Radio	Yes
SiriusXM Ready	Yes
USB Input	Yes
Built-in Microphone	Yes
Subwoofer Output	Yes
iDatalink Maestro Compatible	Yes
Steering Wheel Control Compatible	Yes
Display Size	10.1 inches
Touchscreen	Yes
Bluetooth	Yes
Apple CarPlay	Yes
Android Auto	Yes
USB Ports	2
Preamp Outputs	5V
Built-in Amplifier	Yes
EQ Settings	13-band