Kenwood DMX1057XR User Manual

Connection/Installation
89English
6
Install the display unit (accessory 8) to
the main unit.
Main unit
8
NOTE
• If the display unit hits a panel on the vehicle,
adjust the display height by referring to
Adjusting the display height (P.87).
7
Fix the display unit with six hexagon head
screws (accessory -).
-
8
Attach the protective cover (accessory =)
to coupling part, and then fix it with two
binding head screws (accessory ~).
~
=
NOTE
• If the protective cover (accessory =) is not
attached, this unit will not turn on. Even if the
unit is turned on, the power may be turned off
halfway.
Be sure to attach the protective cover (accessory
=).
9
Raise the display manually.

Kenwood DMX1057XR Specifications

General

Resolution	1280 x 720
HDMI Input	Yes
HD Radio	Yes
SiriusXM Ready	Yes
USB Input	Yes
Built-in Microphone	Yes
Subwoofer Output	Yes
iDatalink Maestro Compatible	Yes
Steering Wheel Control Compatible	Yes
Display Size	10.1 inches
Touchscreen	Yes
Bluetooth	Yes
Apple CarPlay	Yes
Android Auto	Yes
USB Ports	2
Preamp Outputs	5V
Built-in Amplifier	Yes
EQ Settings	13-band