Controlling Audio
75English
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [Audio].
See the following section for each
setting.
• Set up Speaker / X’over (P.76)
• Controlling EQ / SW Level (P.78)
• Set Position / DTA (P.81)
• Controlling Fader / Balance (P.78)
• Set Volume Offset (P.79)
• Set Sound Effect (P.80)
• Use Audio Memory (P.82)
3-way speaker system setup
(DMX958XR / DMX908S)
Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
# CAUTION
• Connecting 3-way speakers with the 2-way
mode selected can break the speakers.
1
Press the [HOME] button.
HOME screen appears.
2
Touch [ ].
Source selection screen appears.
3
Touch [STANDBY].
4
Press the button 1 followed by the
button 2 for 1 second at the same time.
1 2
Speaker system select screen appears.
5
Select the crossover network mode.
A confirmation screen appears.
To Next Page
Loading...
Need help?
General
