What to do if my Kenwood Dash Cameras says 'No update file available'?
If your Kenwood Dash Camera displays 'No update file available', it could be due to several reasons: - There is no firmware data in the SD card. Insert firmware data for the device in the SD card. - The update file in the SD card is the same as or older than the current firmware version. Insert the latest firmware data.
What to do if my Kenwood Dash Cameras says 'No SD card inserted'?
If your Kenwood Dash Camera displays 'No SD card inserted', it could be that the power was turned on without an SD card inserted. Insert an SD card that can be used with the device into the SD card slot.
What to do if formatting failed on Kenwood Dash Cameras?
If formatting fails on your Kenwood Dash Cameras, it likely indicates that the SD card has malfunctioned. Replace the SD card with a new one.
What does uncompatible SD card mean on Kenwood DRV-410 Dash Cameras?
If your Kenwood Dash Cameras displays an incompatible SD card error, it means that the inserted SD card has a capacity less than 8 GB or more than 32 GB. Insert a compatible SD card into the SD card slot.
Why has recording stopped on my Kenwood Dash Cameras?
If recording has stopped on your Kenwood Dash Cameras, it could be due to: * The SD card was removed during recording. Reinsert the SD card. * The SD card may have failed. Replace it with a new one. * A problem occurred. Try changing the overwrite setting in the "Video recording settings".
What to do if my Kenwood Dash Cameras says no SD card inserted?
If your Kenwood Dash Cameras indicates 'No SD card inserted' when powered on, it means that the SD card is missing. Insert a compatible SD card into the SD card slot.
What to do if my Kenwood DRV-410 says SD card requires formatting?
If your Kenwood Dash Cameras displays 'SD card requires formatting', it means the SD card's format is unrecognizable. You should format the SD card using the device.
Why won't my Kenwood DRV-410 turn on?
If your Kenwood Dash Cameras won't power on, consider these potential causes: * The vehicle's cigarette lighter socket may not be active. Try turning on the vehicle's accessories power (ACC) or starting the engine. Also, check the cigarette lighter plug's connection. * A blown fuse could be the issue. Inspect the cords for shorts and replace the fuse with one of the same capacity if needed. * Incorrect power cord connections can prevent power-up. Confirm the connections with your dealer. * If the fuse and wiring are fine, reset the device after consulting the section, 'If You Notice a Problem with the Device'.
Why is my Kenwood DRV-410 not recording?
If your Kenwood Dash Camera isn't recording, there might be several reasons: * Check if an SD card is inserted. * Ensure the SD card's capacity is between 8 GB and 32 GB. * Verify the SD card complies with SDHC standards. * Format the SD card using the device if it's not already formatted. * If the device's internal temperature is high, try to reduce the temperature inside the vehicle to allow recording to resume.
Why does Kenwood Dash Cameras system update fail?
A system update failure on your Kenwood Dash Camera can occur if the update file could not be read properly from the SD card. Format the SD card in the device, copy the update data to the SD card again, and then perform the update operation again.
General| Product color | Black |
|---|---|
| G-shock sensor | Yes |
| Languages support | CZE, DEU, ENG, ESP, FIN, FRE, ITA, POL, POR, RUS, SWE |
| Number of cameras | 1 |
| Main camera sensor | CMOS |
| Maximum frame rate | 27 fps |
| Power cable length | 3.5 m |
| Main camera resolution | 2304 x 1296 pixels |
| Main camera sensor size | 1/3 \ |
| Main camera viewing angle | 128 ° |
| Video compression formats | AVC, H.264, MOV, MPEG4 |
| Audio recording | - |
| Display diagonal | 1.5 \ |
| Compatible memory cards | MicroSDHC |
| Maximum memory card size | 32 GB |
| Wi-Fi | No |
| Operating voltage | 12 V |
| Input operation voltage (max) | 16 V |
| Image formats supported | JPG |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 56 mm |
|---|---|
| Width | 77 mm |
| Height | 34 mm |
| Weight | 79 g |
Guides on safe device installation, operation while driving, and lens care.
Instructions for cleaning the device and steps to resolve common issues or reset the unit.
Details on the optimal placement of the device inside the vehicle for best recording and safety.
Guide to configure device settings like mounting height and horizon for optimal driving support function performance.
Instructions for handling SD cards and controlling the device's power.
Explains the different types of recording the device performs.
How to manually record video clips and capture still images.
Explanation of the icons and information displayed on the device's recording screen.
Steps to select and play recorded video files or photos from the device's storage.
Details on the icons and information displayed during video playback on the device.
Procedures to protect important files or delete unwanted recordings and photos via the playback menu.
Configuration for date, time, language, and system updates.
Adjusting video quality, parking, and file handling options.
Configuring driving assistance features and managing the SD card.
Step-by-step guide to set the device's date and time automatically or manually.
Installing the PC software and accessing recorded files from the SD card.
Using the PC software for file operations, playback, map viewing, and data export.
Information on supported SD cards, usage precautions, disposal, and file structure.
Explanation of how the driving support features work, their limitations, and operating conditions.
Details on how GPS positioning works, its limitations, and factors affecting signal reception.
To Next Page
