Do you have a question about the Kenwood KAC-9103D and is the answer not in the manual?
Amplifier Class | D |
---|---|
Number of Channels | 1 |
RMS Power at 4 Ohms | 500 W |
RMS Power at 2 Ohms | 900 W |
Minimum Impedance Unbridged | 1 Ohm |
Signal to Noise Ratio | 100 dB |
Low-Pass Crossover Frequency | 50 Hz - 200 Hz |
Fuse Rating | 40A x 2 |
Low Pass Filter | Yes |