To Next Page
C
catherinesmithSep 8, 2025
What to do if “NA DEVICE” appears on Kenwood Car Receiver?
- SsusandudleySep 9, 2025
If your Kenwood Car Receiver displays 'NA DEVICE', connect a supported USB device and check the connections.
What to do if “NA DEVICE” appears on Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'NA DEVICE', connect a supported USB device and check the connections.
What to do if the disc cannot be ejected from Kenwood KDC-U559BT Car Receiver?
If you can't eject a disc from your Kenwood Car Receiver, press and hold the M button to force eject it. If that doesn't work, reset the unit.
Why is the radio reception poor on my Kenwood KDC-U559BT?
If you're experiencing poor radio reception on your Kenwood Car Receiver, make sure the antenna is firmly connected and fully extended.
What to do if “DEVICE FULL” appears on Kenwood KDC-U559BT?
If your Kenwood Car Receiver displays 'DEVICE FULL', retry after deleting an unnecessary device.
What to do if no Bluetooth device is detected by Kenwood KDC-U559BT Car Receiver?
If your Kenwood Car Receiver isn't detecting a Bluetooth device, try searching for it again from the Bluetooth device itself, or reset the unit.
How to fix pairing if it cannot be made on Kenwood KDC-U559BT?
If you are unable to pair your Kenwood Car Receiver, ensure that you have entered the same PIN code on both the unit and the Bluetooth device. Delete the pairing information from both devices and try pairing again.
How to fix echo or noise that occurs on Kenwood Car Receiver?
Adjust the microphone unit’s position and check the [ECHO CANCEL] setting to address echo or noise issues with your Kenwood Car Receiver.
Why is the phone sound quality poor on Kenwood KDC-U559BT Car Receiver?
If the phone sound quality is poor on your Kenwood Car Receiver, try reducing the distance between the unit and the Bluetooth device, or move the car to a location with a better signal.
What to do if “NO MUSIC” appears on Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'NO MUSIC', connect a USB device that contains playable audio files.
What to do if “iPod ERROR” appears on Kenwood KDC-U559BT?
If your Kenwood Car Receiver shows 'iPod ERROR', try reconnecting the iPod or resetting it.
General| Brand | Kenwood |
|---|---|
| Model | KDC-U559BT |
| Category | Car Receiver |
| Language | English |
Important safety precautions for operation and volume settings.
Steps to cancel demonstration, set clock, and configure initial settings.
Steps to connect the microphone and pair Bluetooth devices.
Handling calls, adjusting volume, voice recognition, and text notifications.
Storing, making, deleting calls, and managing phonebook entries.
How to play audio wirelessly via Bluetooth, including playback controls.
Troubleshooting guide for various issues like no sound, errors, and device detection.
