EasyManuals Logo

Kenwood KMM-BT205 User Manual

Kenwood KMM-BT205
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Depending on the operating system and the firmware version of your mobile phone, Bluetooth
features may not work with this unit.
Pair and connect a Bluetooth device for the first time
1
Press B SRC to turn on the unit.
2 Search and select the name of your receiver (“KDC-BT6 ”/“KDC-BT5 ”) on the Bluetooth
device.
“PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME KNOB” appears on the
display.
For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN)
code immediately after searching.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established automatically.
: “BT1” and/or “BT2” indicator on the faceplate lights up.
: “BT1” and/or “BT2” on the display window lights up.
This unit supports Secure Simple Pairing (SSP).
Up to five devices can be registered (paired) in total.
Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you
reset the unit. To delete the paired device, see
[DEVICE DELETE]
on page 16.
A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any
time.
However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch
between these five devices. (Page 17)
Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the
device to the unit manually.
Refer to the instruction manual of the Bluetooth device for more information.
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
Hands-Free Profile (HFP)
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
Serial Port Profile (SPP)
Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
Sub Band Codec (SBC)
Advanced Audio Coding (AAC)
Connect the microphone
Adjust the microphone
angle
Secure using cord clamps (not
supplied) if necessary.
Microphone input jack
Microphone (supplied)
Rear panel
JS_KWD_KDC_BT630U_MN_EN_3rd draft.indd 12JS_KWD_KDC_BT630U_MN_EN_3rd draft.indd 12 7/11/2018 8:57:30 AM7/11/2018 8:57:30 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood KMM-BT205 and is the answer not in the manual?

Kenwood KMM-BT205 Specifications

General IconGeneral
BluetoothYes
USB version2.0
Bluetooth range10 m
Bluetooth version3.0+HS
USB port positionFront
Bluetooth profilesA2DP, AVRCP, HFP, PBAP, SPP
USB connector typeUSB Type-A
USB ports quantity1
Bluetooth functionsAudiostreaming, Handsfree calling
Storage temperature (T-T)-30 - 85 °C
Display typeLCD
Display digits13 digits
Illumination colorWhite
DIN size1 DIN
Impedance8 Ω
Clock mode12h/24h
Output power200 W
RDS featuresPTY
Product colorBlack
Volume controlRotary
Frequency range20 - 20000 Hz
Disc types supportedNo
Audio output channels- channels
Equalizer bands quantity13
Maximum power per channel50 W
Signal-to-Noise Ratio (SNR)99 dB
Mobile operating systems supportedAndroid, iOS
AM band range531 - 1611 kHz
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Supported radio bandsAM, FM, LW, MW
Audio formats supportedAAC, FLAC, MP3, WAV, WMA
Hands-free callingKeep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Weight and Dimensions IconWeight and Dimensions
Weight600 g

Related product manuals