M
Michael MyersSep 8, 2025
What does “SWITCHING NG” mean on my Kenwood Receiver?
- SSamuel RodgersSep 9, 2025
If your Kenwood Receiver displays “SWITCHING NG”, the connected phones might not support the phone switching feature.
To Next PageTo Next PageWhat does “SWITCHING NG” mean on my Kenwood Receiver?
If your Kenwood Receiver displays “SWITCHING NG”, the connected phones might not support the phone switching feature.
What does “HF ERROR XX” mean on my Kenwood Receiver?
If your Kenwood Receiver displays “HF ERROR XX” or “BT ERROR”, reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center.
What does “NO INFO” mean on my Kenwood Receiver?
If your Kenwood Receiver displays “NO INFO” or “NO DATA”, the Bluetooth device cannot get the contact information.
What does “ERROR” mean on my Kenwood KMM-BT505DAB?
If your Kenwood Receiver displays “ERROR”, try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
What does “NO ENTRY” mean on my Kenwood KMM-BT505DAB?
If your Kenwood Receiver displays “NO ENTRY” or “NO PAIR”, there is no registered device connected or found via Bluetooth.
What to do if the source does not change to “USB” on my Kenwood KMM-BT505DAB Receiver?
If the source does not change to “USB” when you connect a USB device while listening to another source on your Kenwood Receiver, it may be because the USB port is drawing more power than the design limit. Turn the power off, unplug the USB device, then turn the power back on and reattach the USB device. If the problem persists, turn the power off and on (or reset the unit) before trying another USB device.
Why can't I control my Bluetooth audio player with my Kenwood KMM-BT505DAB Receiver?
If the connected Bluetooth audio player cannot be controlled with your Kenwood Receiver, check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). If it does, disconnect and reconnect the Bluetooth player again.
Why is voice calling not working on my Kenwood KMM-BT505DAB Receiver?
If voice calling is not successful with your Kenwood Receiver, use voice calling in a quieter environment. Also, reduce the distance from the microphone when you speak the name, and ensure you use the same voice as the registered voice tag.
Why is there echo during phone calls on my Kenwood KMM-BT505DAB Receiver?
If you hear echo or noise during a phone conversation on your Kenwood Receiver, adjust the microphone unit’s position. You can also check the [ECHO CANCEL] setting.
How to fix pairing issues with my Kenwood Receiver?
If pairing cannot be made on your Kenwood Receiver, ensure you have entered the same PIN code on both the unit and the Bluetooth device. If the problem persists, delete the pairing information from both the unit and the Bluetooth device, then perform pairing again.
General| Category | Receiver |
|---|---|
| Brand | Kenwood |
| Model | KMM-BT505DAB |
| Type | Digital Media Receiver |
| Power Output | 4 x 50W |
| Bluetooth | Yes |
| DAB/DAB+ | Yes |
| USB Port | Yes |
| Aux Input | Yes |
| Display Type | LCD |
| Variable Color Illumination | Yes |
| Android Music Playback | Yes |
| iPhone/iPod Music Playback | Yes |
| FLAC Playback | Yes |
| AM/FM Tuner | Yes |
| Built-in Microphone | Yes |
| Compatible with Android | Yes |
| Compatible with iPhone | Yes |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Remote Control | Optional |
