How to stop hearing other voices on my Kenwood TK-3400 Transceiver channel?
Change the QT/DQT settings and make sure all group members change the settings on their transceivers to match the new QT/DQT setting.
What to do if I cannot hear other members of my group on my Kenwood Transceiver?
If you cannot hear other members of your group, ensure you are using the same frequency and QT/DQT settings. Also, check if other group members are using the Scrambler function and turn on your transceiver’s Scrambler. Finally, make sure you are within range of the other transceivers.
What to do if I hear other voices on the channel of my Kenwood Transceiver?
If you are hearing other voices besides your group members on the channel, change the QT/DQT settings. Make sure all group members change the settings on their transceivers to match the new QT/DQT setting.
Why can't I hear other group members on my Kenwood TK-3400?
Ensure you're using the same frequency and QT/DQT settings as the rest of your group. Also, check if other members are using the Scrambler function and turn on your transceiver’s Scrambler. Finally, confirm that you are within range of the other transceivers.
What to do if my Kenwood Transceiver won't turn on?
The battery pack may be dead, so recharge or replace it. Alternatively, the battery pack may not be installed correctly. Remove the battery pack and install it again to ensure proper contact.
Why does my Kenwood Transceiver battery die quickly after charging?
The battery pack life is finished. Replace the battery pack with a new one.
How to turn on Kenwood Transceiver if it doesn't power on?
If your Kenwood Transceiver does not power on, the battery pack may be dead. Try to recharge or replace the battery pack. Also, the battery pack may not be installed correctly. Remove the battery pack and install again.
Why does the battery of my Kenwood Transceiver die quickly after charging?
If the battery power dies shortly after charging, the battery pack life is finished. Replace the battery pack with a new one.
General| Frequency Range | 400-470 MHz |
|---|---|
| Channels | 16 |
| Power Output | 5W |
| Weight | 300 g |
| Channel Spacing | 12.5/25 kHz |
| Voltage | 7.5V |
| Modulation | FM |
| Type | UHF |
| Battery | Li-ion battery |
| Operating Voltage | 7.5V |
Covers FCC warnings, modifications, and digital device user requirements.
Information on RBRC Li-ion battery recycling program.
Includes general notices to users and safety awareness.
Lists important precautions for transceiver operation.
Lists locations where transceiver power must be turned off.
Details cautions for handling and operating the transceiver.
Information on battery pack contents and mishandling risks.
Dangers associated with battery disassembly, short-circuiting, and heat.
Dangers related to using incorrect chargers or damaging the battery.
Precautions for handling ruptured or leaking battery packs.
Warnings against overcharging or using abnormal batteries.
Instructions for unpacking and verifying transceiver contents.
List of items included with the transceiver package.
Procedure for correctly attaching the antenna to the transceiver.
Steps for installing and removing the battery pack.
Instructions on how to charge the battery pack before use.
Information on charging time, indicators, and ambient temperature.
Procedure for attaching the belt clip to the transceiver.
How to cover speaker/ microphone jacks for water resistance.
Steps for connecting optional speaker or microphone.
Identifies key controls and features of the transceiver.
Details the functions of the Side 1 and Side 2 keys.
Location for connecting external audio accessories.
Explains basic functions like power on, channel selection, and transmitting.
Describes the meaning of different LED indicator lights.
How to activate and configure hands-free VOX operation.
Covers Time-out Timer, Low Battery Warning, and Channel Announcement.
How to reprogram channels with different frequencies and QT/DQT settings.
Lists default frequencies and QT/DQT settings for TK-3400 models.
Step-by-step guide to changing operating frequencies for a channel.
Table of operating frequencies for TK-2400 models by table number.
Table of operating frequencies for TK-3400 models by table number.
Explanation of Quiet Talk (QT) and Digital Quiet Talk (DQT) functions.
List of QT numbers and their corresponding frequencies.
List of DQT numbers and their corresponding codes.
How to confirm current channel settings.
Allows reprogramming of Side 1 and Side 2 keys.
Step-by-step guide to changing Side key functions.
Details on Key Lock, Status Memory, Monitor, and Monitor Momentary.
Explains Scan, Squelch Off, and Squelch Off Momentary functions.
Details on Super Lock and Low Transmit Power functions.
Provides solutions for common transceiver problems.
Procedure to reset transceiver settings to default values.
List of optional accessories available for the transceiver.
Information on RF energy, exposure limits, and safe operating practices.
To Next Page
