Need help?Do you have a question about the Kenwood TK-7108 and is the answer not in the manual?
General| frequency range | 146 to 174MHz |
|---|---|
| number of channels | 8 channels |
| channel spacing | 25kHz |
| operating voltage | 13.6V DC ±15% |
| current drain on standby | Less than 0.4A |
| current drain on receive | Less than 1.0A |
| current drain on transmit | Less than 8.0A |
| operating temperature range | –30°C to +60°C |
| dimensions | 160 (W) x 43 (H) x 107 (D) mm |
| weight | Approx 1.0kg |
Receiver| sensitivity (12dB SINAD) wide | 0.28µV |
|---|---|
| sensitivity (12dB SINAD) narrow | 0.35µV |
| selectivity wide | 75dB |
| selectivity narrow | 65dB |
| intermodulation wide | 70dB |
| intermodulation narrow | 60dB |
| spurious response | 75dB |
| audio power output | 4.0W |
| frequency stability | ±2.5ppm |
Transmitter| RF power output | 25W |
|---|---|
| spurious and harmonics | 70dB |
| modulation wide | 16K0F3E |
| modulation narrow | 11K0F3E |
| FM noise wide | 45dB |
| FM noise narrow | 40dB |
| audio distortion | Less than 3% |
| frequency stability | ±2.5ppm |
Warnings for explosive atmospheres, RF injury, and dynamite blasting caps.
Detailed explanation of the front panel controls, keys, and indicators.
How to power on/off, adjust volume, and select channels.
Steps for making and receiving calls using the transceiver.
Instructions for activating, using, and deactivating the scan function.
Procedures for entering, exiting, and managing emergency mode.
To Next Page
