EasyManuals Logo

Kenwood TK-7180 Brochure & Specs

Kenwood TK-7180
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REMOTE CONTROL HEAD (OPT.)
WIDE BAND COVERAGE
EXTRA LARGE CHANNEL CAPACITY
DUAL PRIORITY SCAN
DOT MATRIX DISPLAY
ENHANCED KENWOOD AUDIO
VOICE INVERSION SCRAMBLER
FleetSync
®
/ FleetSync
®
II
5-TONE SIGNALLING
LONE WORKER
TRANSPARENT DATA MODE
GPS READY (NMEA0183 COMPATIBLE)
VGS-1 VOICE GUIDE & STORAGE UNIT
(OPTION)
EASY OPTION PORT (26-PIN)
DB-25 ACCESSORY CONNECTOR
REAL-TIME CLOCK FOR TIME STAMPING
MEETS/EXCEEDS MIL-STD BLOWING RAIN &
IP54/55
FULL KEYPAD MODEL AVAILABLE
(TK-7189/8189)
TK-7180/8180
VHF/UHF FM Mobile Radios
TK-7180/8180
TK-7189/8189

Other manuals for Kenwood TK-7180

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood TK-7180 and is the answer not in the manual?

Kenwood TK-7180 Specifications

General Specifications IconGeneral Specifications
frequency range136~174MHz
number of channelsMax. 512
channel spacing (wide)25, 30kHz
channel spacing (narrow)12.5, 15kHz
operating voltage13.6V DC ± 15%
Current Drain IconCurrent Drain
standby current drain0.4A
receive current drain1.0A
transmit current drain9.0A
Operating Environment IconOperating Environment
duty cycleTransmit : 20%
operating temperature range–22°F~+140°F (–30°C~+60°C)
frequency stability± 0.00025% (–22°F~+140°F)
Receiver IconReceiver
sensitivity (12dB SINAD) wide0.25µV
sensitivity (12dB SINAD) narrow0.28µV
selectivity wide80dB
Transmitter IconTransmitter
RF power output30 to 1W
spurious response70dB
microphone impedance600Ω
Weight and Dimensions IconWeight and Dimensions
antenna impedance50Ω
dimensions (W x H x D)6-5/16 x 1-3/4 x 6-3/16 in. (160 x 45 x 157 mm)
weight3.31lbs. (1.5kg)

Related product manuals