Need help?Do you have a question about the Kenwood TKR-D710 and is the answer not in the manual?
General| Certification | FCC, IC |
|---|---|
| Built-in display | Yes |
| Operating temperature (T-T) | -30 - 60 °C |
| Input voltage | 13.6 V |
| Power consumption (max) | 50 W |
| Channels quantity | 30 channels |
| Reception range (UHF) | 136 - 174 MHz |
| Number of programmable buttons | 6 |
Weight and Dimensions| Depth | 340 mm |
|---|---|
| Width | 483 mm |
| Height | 88 mm |
| Weight | 9700 g |
Lists essential safety measures to prevent fire, electric shock, and damage during operation and handling.
Covers FCC warnings, digital device compliance, and firmware copyright information.
Details the speaker, display, controls, indicators, and microphone jack on the front panel.
Explains the various input/output jacks and connectors on the rear panel for connectivity.
Covers initial setup, status displays, and indicator lights for normal operation.
Guides on receiving and transmitting in analog mode, including volume adjustment and PTT use.
Details pinouts for MIC, Test/Speaker, Control I/O, and N SYNC connectors, specifying signals and functions.
Identifies the BNC and N connectors used for antenna input/output and reference clock input.
Guidelines for safe antenna mounting, separation distances, and FCC RF exposure compliance.
Emphasizes user responsibility for safe operation and warns against antenna substitution.
To Next Page
