Need help?Do you have a question about the Kenwood TKR-820(N) and is the answer not in the manual?
Essential safety guidelines to prevent injury and equipment damage during operation.
Procedures for installing the duplexer, including connections and fittings.
Explanation and method for setting the signaling wait mode.
Procedure for disassembling the main transmitter/receiver components.
Detailed steps for removing the TX-RX unit from the chassis.
Steps for disassembling the Automatic Voltage Regulator (AVR) unit.
Overall block diagram of the TKR-720/N/A system.
Detailed description of the transmitter circuit operation and components.
Explanation of the receiver circuit's function and signal path.
Description of the squelch circuit and its role in audio output.
Description of the receiver frequency synthesizer circuit.
Description of the transmitter frequency synthesizer circuit.
Description of the signaling unit's operation, including tone and busy signals.
Explanation of the takeover switch and its function with accessory terminals.
Description of the Automatic Voltage Regulator (AVR) circuit and its function.
Technical data and block diagram for the JLC1075F PLL system IC.
Data and diagrams for the M51943BML reset system IC.
Technical data for the M57719 RF amplifier/driver components.
Pinout and terminal function explanation for the µPD78310AGF microprocessor.
Electrical characteristics and terminal connections for the 2SC2694 power amplifier.
Pinout and terminal function explanation for the 75104G-604-1B microprocessor.
Components and descriptions for the TX-RX unit.
List of necessary test equipment and their major specifications for calibration.
Circuit diagram and technical specifications for the KMC-9 microphone.
Transmitter and signaling specifications including power output and frequency.
To Next Page
General