Need help?Do you have a question about the Kenwood TM-G707A and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TM-G707A |
| Category | Transceiver |
| Language | English |
Lists the TM-G707A model for US/Canada markets.
Lists the TM-G707A model for the general market.
Lists the TM-G707E model for the European market.
Details FCC compliance, potential interference, and warnings.
Outlines essential safety guidelines to prevent injury and damage.
Covers installation, power, antenna, and accessory connections.
Introduces modes, controls, panel layout, microphone, and indicators.
Covers switching power, adjusting volume, and setting squelch.
Covers PM info, examples, storing, recalling, auto storage, and resetting.
Details scan resume methods, types (VFO, Memory, MHz, Program), and lockout.
Covers CTCSS activation, frequency selection, and automatic tone identification.
Covers sending DTMF calls and using keypad confirmation tones.
Lists available optional accessories for the transceiver.
Guides on installing voice synthesizer and detachable panel kits.
Covers service, notes, cleaning, and troubleshooting procedures.
Lists technical specifications of the transceiver.
Summarizes functions activated by holding keys during power-on.
Lists the items included with the transceiver package.
Explains writing conventions and how to interpret key press instructions.
Details on fuse locations, ratings, and replacement.
Proper procedures and cautions for connecting an antenna.
How to connect external speakers and microphones.
Required equipment and setup for packet operation.
Details VFO, Memory Recall, PM, and Menu modes.
Explains the functions of key front panel buttons and the tuning control.
Details the operation of various front panel buttons and controls.
Identifies and describes rear panel connectors.
Details the functions of microphone buttons, PF key, and DTMF keypad.
Covers switching power, adjusting volume, setting squelch, and band switching.
Methods for changing frequencies using the main knob or microphone buttons.
How to transmit and select transmit power levels.
Explains the menu system and how to navigate it.
Guides on accessing repeaters, including offset and tone settings.
How to set transmit frequency relative to receive frequency and choose offset value.
Covers CTCSS activation, frequency selection, and tone ID.
Explains the difference between simplex/repeater and odd-split memory channels.
How to store simplex, standard repeater, and odd-split frequencies.
How to retrieve and erase stored memory channel data.
How to assign names and toggle between name/frequency display.
How to access and update the Call channel.
How to perform partial (VFO) and full (memory) resets.
Steps to save current settings into PM channels.
Steps to retrieve saved settings from PM channels.
Covers auto PM storage and resetting PM channels.
Configures how scanning resumes after detecting a signal.
How to perform VFO and Memory scans.
How to exclude channels from scans and perform MHz scans.
How to define frequency ranges for program scanning.
How to perform Program, Call/VFO, and Call/Memory scans.
How to save a frequency for priority monitoring.
Choosing and activating priority scan modes.
Sending DTMF calls and using keypad confirmation tones.
Procedures for managing DTMF numbers for auto-dialer.
How to reassign functions to PF keys.
Sets transmission time limits and automatic power off.
How to enter frequencies and memory numbers using the keypad.
How to enter tone frequencies and adjust frequency step size.
Adjusts display brightness, beep volume, and activates demo mode.
Disables functions and customizes the power-on message.
Sets squelch sensitivity based on signal strength and adjusts squelch closing delay.
Reduces interference and allows AM reception.
Configures data transfer rate for packet communication.
Steps to install the VS-3 voice synthesizer unit.
Instructions for installing DFK kits.
Covers service, notes, cleaning, and troubleshooting procedures.
To Next Page
