39
EN
DVD player operations
The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player.
Group-1 : DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530 and DV-402
Group-2 : DV-4050, DV-303, DVF-R6030, DVF-K5020, DVF-5020, DVF-3020 and DVF-3030
Depending on your KENWOOD DVD model, you need to set up your receiver remote control as follows:
To set for Group-1 DVD players:
Press the numeric "1" key while pressing the "POWER" key (not the DVD Power key) on your remote control.
To set for Group-2 DVD players:
Press the numeric "2" key while pressing the "POWER" key (not the DVD Power key) on your remote control.
• If your DVD player is not listed in the list above, perform the set up for either Group-1 or Group-2. When the set up is successful, then your DVD player
falls into that particular group.
How to operate DVD player with the remote control
1. Pressing the DVD Power key for more than 2 seconds turns the DVD player on or off.
2. To carry out the functions of the DVD player, first press the DVD Power key, then press each key for each operation as explained in the DVD operation
pages in the operating instructions. In this case, the DVD operation mode is retained for 15 seconds after pressing any of those DVD operation
buttons.
(To turn the receiver operation mode within 15 seconds, press the RECEIVER (
) key.)
DVD player operation keys
You can perform these basic operations using the keys described below when connected to KENWOOD DVD player.
CD/DVD
LEARN
VCR
INPUT MODE
SET UP
P.CALL
CBL
REMOTE MODE
TV
STEREO
+
DSS/SAT
OTHERS
DSP MODE
I /
w
RECEIVER
I /
w
I /
w
SOURCE RECEIVER
LSTN.M UP
LSTN.M DOWN
CINEMA EQ
ACTIVE EQ.
OSD
PAGE DOWN PAGE UP
RETURN
DISC SEL. DISC SKIP
FLIP BAND
INPUT SEL. A/B AUTO
8
DVD CD/DVD PHONO TUNER
VIDEO1 VIDEO2 VIDEO3 MD/TAPE
AV A UX
LOUDNESS
TONE
B.BOOST
MUTE
DVD
SOUND
TOP MENU MENU
P.CALL
/DOWN /UP
TV CONTROL
LCD
VOL.
ENTER
INPUT SEL.
MULTI CONTROL
TUNING
¢
4
1¡ 2 6
7
DIMMER
2 3
4¢
5
∞
1
4
7
+10
2
5
8
0
3
6
9
+100
CH RCV. VOL.
+
-
-
INPUT SEL.
+
-
DVD (Remote mode)
Numeric
(Select Tracks)
(Skip Up)
(Skip Down)
TOP MENU (Title)
OSD
1 (Backward Search)
¡ (Forward Search)
DISC SEL.
DISC SKIP
ENTER
SOURCE (POWER)
2 (FLIP)
3
/
8
(Play)
8 (Pause)
7 (Stop)
RECEIVER (Receiver Power)
MENU (Menu)
5 (Cursor Up)
∞ (Cursor Down)
2
(Cursor Left)
3
(Cursor Right)
RETURN
For RC-R0816 only
LCD
RC-R0816/R0725
Basic remote control operations for other components
•VR609/36-46/EN 10/24/01, 10:40 PM39
To Next Page
Loading...
Need help?
General
