KERN 470-46 User Manual

470-BA-defs-0017
44
Important!
In case the balance should be unstable in the range of the limiting points,
the vibration filter should be turned less sensitive, see point 10 „General
programmations“.
7.2 Input of the limiting values using the keyboard
Press
S
and release it when
L. SEt
appears.
Now flashing display of either
0
or of the actual memorised lower limiting value.
Press
TARE
,
0
start to flash. Further see point 6.4.2 „Input of the reference
weight, using the keyboard“ with example 321,5 g i.e. lower limiting value.
After having confirmed the lower limiting value with
S
0
will appear flashing,
or the memorised upper limiting value.
Press
TARE,
0
starts to flash.
Input the upper limiting value as explained above and confirm with
S
.
Weighing with tolerance range see point 7.1.
7.3 Deletion of the limiting values
Press
S
and release it when
L. SEt
appears
Now flashing display of the actual memorized lower limiting value.
Press
TARE
,
0
Starts to flash. Confirm with S, the lower limiting value is
deleted.
Now the upper limiting value appears flashing.
Press
TARE
,
0
starts to flash. Confirm with
S
, the upper limiting value is deleted.
The limiting points can also be changed by over-writing.
Important:
Limiting values have to be deleted in order
to return to the weighing mode.

KERN 470-46 Specifications

General

Brand	KERN
Model	470-46
Category	Scales
Language	English