12.2 Menu overview [
]
Function Choice Parame-
ter selec-
tion
Description of function
Key Display Key
Display
weighing
data in
summation
memory
(Kap.10)
nnPLU
Weighing data pop up for 3 sec. after
key was pressed
Weighing data remain popped up after
key was pressed until key is op-
erated
Weighing data will not pop up after
key was pressed, only an audio signal is
sounded
PRE-TARE
mode (Chpt.
9.2)
PTTXP
Input of tare only possible when weigh-
ing plate is unloaded.
Input of tare only possible when weigh-
ing plate is loaded.
PRE-TARE
mode (Chpt.
8.5)
0.TXTP
Only stable weighing values are allowed
for the target number of pieces
All weighing values (stable/instable) are
allowed for the target number of pieces
Import
weighing
value adding
up (chap.10)
�
nnPTP
M+ for stale weighing values only
M+ for stable/instable weighing values
�
nnPB0
The balance must be reset to zero be-
tween individual weighings
The balance needs not to be reset be-
tween individual weighings
CXB/CXP-BA-e-1417 40
To Next Page
Loading...
