EOB-B_EOE-B_EOS-B-SH-e-1911 - 11 -
Taring
Place an empty weighing container, the weight of the weighing
container will be displayed.
Press , the zero display appears. The indicator [NET] is
displayed. The tare weight is saved until it is deleted.
Weigh the material, the net weight will be indicated.
The taring process can be repeated any number of times,
e.g. when adding several components for a mixture
(adding). The limit is reached when the whole weighing
range is exhausted.
After removing the weighing container, the weight of the
weighing container appears as negative display.
The tare weight is saved until it is deleted.
Delete tare value:
Unload the balance and press , zero display will appear.
Hold function (animal weighing function)
The balance has an integrated animal weighing function (mean value calculation). Using this
function it is possible to weigh domestic or small animals exactly (min. load 1% of the max.
one), although they do not stand quiet on the weighing pan.
Place weighing goods and press . The display will be
blinking [-HOLD] and the indicator [hold] will be displayed.
During this time the balance takes up several measured values
and displays then the calculated mean value.
This value will be displayed until you press again. The
indicator [hold] turns off, the balance will return to the normal
weighing mode.
By pressing again, this function can be repeated any
number of times.
To Next Page
Loading...
Need help?
General
