EOB-B_EOE-B_EOS-B-SH-e-1911 - 3 -
Basic Information
The device must be repaired only by trained specialist staff or personnel with professional formation
(such as a repair-specialist accredited by law concerning verification). The service manual is obligatory
for repair work. After repair, original conditions of the device have to be restored. Only original spare
parts should be used.
Instructions about conformity-evaluated scales:
Repair must be carried only at 100% compliance with the type approval. A violation of this
specification will result in a loss of the type approval! After successful repair the balance will have to
be reverified before it can be used again in a statutorily regulated field.
Detailed instructions about conformity-evaluated scales:
Repair must be carried only at 100% compliance with the type approval. A violation of this
specification will result in a loss of the type approval!
After successful repair the balance will have to be reverified before it can be used again in a statutorily
regulated field.
Introdution
This service manual covers the EOB / EOE / EOS series and is edited for the authorized servicing
personnel.
Note all rights are reserved. Copying any part of this manual is prohibited without our permission.
.
To Next Page
Loading...
Need help?
General
