KERN EOB User Manual (English)

Other manuals for KERN EOB

Operating Instructions24 pages

Operation Instructions22 pages

Questions and Answers:

C
Christina RussellJul 26, 2025
Why is the weighing value obviously wrong on my KERN EOB?
- F
  Frederick KellyJul 26, 2025
  The weighing value on your KERN Scales might be incorrect due to several factors. Electromagnetic fields or static charging could be interfering; try relocating the scale or switching off any nearby devices that may be causing interference. Also, ensure the display is at zero, the adjustment is correct, the surface is even, and there are no significant temperature fluctuations.
A
Amy HowardAug 1, 2025
What to do if the displayed weight is permanently changing on KERN Scales?
- C
  connorwilliamsAug 1, 2025
  If the displayed weight on your KERN Scales is constantly changing, it could be due to several reasons. Ensure the balance is switched on and that the mains supply connection is stable (check the mains cable). A power interruption could also be the cause. Other potential factors include draught or air movement, table or floor vibrations, or the weighing plate coming into contact with foreign matter. Address these issues to stabilize the weight display.
D
Danielle MasseyAug 5, 2025
What to do if KERN EOB display unit shows an EEPROM error?
- J
  Janet MathewsAug 5, 2025
  If your KERN Scales display unit shows an EEPROM error, reset the device.
M
Mr. David Warren PhDAug 11, 2025
What to do if my KERN EOB show an EEPROM error?
- S
  samanthaelliottAug 11, 2025
  If your KERN Scales show an EEPROM error, reset the device.
C
Curtis MartinezAug 15, 2025
What to do if my KERN EOB show an overload error?
- D
  david93Aug 15, 2025
  If your KERN Scales display an overload error, it means the weight on the balance exceeds its capacity. Reduce the weight to resolve this issue.
P
Pamela BlackwellAug 20, 2025
What to do if KERN EOB Scales show weight under the minimum value?
- M
  Mary SimsAug 20, 2025
  If your KERN Scales indicate that the weight is below the minimum value, increase the weight on the balance.

KERN EOB Specifications

General

Interface	RS-232
Calibration	External calibration
Weighing range [Max]	6 kg
Permissible ambient temperature	5 °C/35 °C
Material	Plastic
Readability	0.1 g
Reproducibility	0.1 g