CountingFTC-BA-e-0720
18User manual ME-Nr.22017145 01/07
3 Counting
The compact scales FTC have additional functions for piece counting. The relevant set-
tings in the menu are described in Section 4.4.1.
3.1 Counting parts into a container
1. Place the empty container on the scale and press .
The container is tared and the zero display appears.
2. Place 10 reference parts on the scale and press .
-or-
➜ Place the number of pieces displayed above the key on the scale and press
.
The scale determines the average piece weight and then shows the number of
pieces.
3. Add more parts to the container until the required number of pieces is reached.
Note
• The average piece weight remains saved in the factory setting until a new average
piece weight is determined.
• With it is possible to switch between the number of pieces and the weighing
units preset.
• When the number of pieces is displayed, it is possible to display with the
average piece weight, i. e. the weight of a single reference part, for 2 seconds.
• If A.CL-APW ON is set in the menu, the average piece weight is automatically
cleared after each counting operation. The average piece weight must be deter-
mined again for the next counting operation.
• If ACCurCY ON is set in the menu, the accuracy achieved is briefly shown after
the number of pieces is determined.
To Next Page
Loading...
Need help?
General
