To Next Page

To Previous Page

Interface descriptionFTC-BA-e-0720

42User manual ME-Nr.22017145 01/07

5.2 TOLEDO Continuous mode

5.2.1 TOLEDO Continuous commands

The scale supports the following input commands in TOLEDO Continuous mode:

5.2.2 Output format in TOLEDO Continuous mode

Weight values are always sent in the following format in TOLEDO Continuous mode:

Command Meaning

P <CR><LF> Print out the current result

T <CR><LF> Tare the scale

Z <CR><LF> Zero the display

C <CR><LF> Clear the current value

Tx.xxx <CR><LF> Define tare

Status Field 1 Field 2

123456789101112131415161718

STXSWASWBSWCMSD – – – –LSDMSD – – – –LSDCRCHK

Field 1

Field 2

STX

SWA, SWB, SWC

MSD

LSD

CHK

6 digits for the weight value that is sent without a decimal point and unit

6 digits for the tare weight that is sent without a decimal point and unit

ASCII characters 02 hex, characters for "start of text"

Status words A, B, C, see below

Most significant digit

Least significant digit

Carriage Return, ASCII characters 0D hex

Checksum (2-part complement of the binary sum of the 7 lower bits of all previously sent

characters, incl. STX and CR)

KERN FTC User Manual

Other manuals for KERN FTC