To Next Page

To Previous Page

FTC-BA-e-0720

Interface description

User manual ME-Nr.22017145 01/07

5.1.2 Requirements for communication between scale and PC

• The scale must be connected to the RS232 or Ethernet interface of a PC with a suit-

able cable.

• The interface of the scale must be set to "Dialog" mode, see Section 4.6.1.

• A terminal progam must be available on the PC, e.g. HyperTerminal.

• The communication parameters baud rate and parity must be set in the terminal

program and on the scale to the same values, see Section 4.6.3.

KERN FTC User Manual

Other manuals for KERN FTC