FTC-BA-e-0720
45
Event and error messages
User manual ME-Nr.22017145 01/07
• Unstable weight value when
referencing
➜ Ensure stable surroundings
➜ Ensure that the weighing pan is
freely movable
➜ Adjust vibration adapter
• Printout not yet ended ➜ End printout
➜ Repeat required action
• Switching the weighing unit
impermissible during dynamic
weighing
➜ End dynamic weighing
➜ Switch weighing unit
• EAROM checksum error ➜ Unplug the mains plug then plug
it back in; switch unit off and then
back on in battery mode
➜ Contact your dealer or local rep-
resentative
Weight display unstable
• Restless installation location ➜ Adjust vibration adapter
• Draft ➜ Avoid drafts
• Restless weighing sample ➜ Dynamic weighing
• Contact between weighing pan
and/or weighing sample and
surroundings
➜ Remedy contact
• Mains fault ➜ Check mains
Incorrect weight display
• Incorrect zeroing ➜ Unload scale, set to zero and
repeat weighing operation
• Incorrect tare value ➜ Clear tare
• Contact between weighing pan
and/or weighing sample and
surroundings
➜ Remedy contact
• Scale tilted ➜ Level scale
Error Cause Remedy
To Next Page
