Need help?Do you have a question about the KERN GAB and is the answer not in the manual?
Describes the intended and correct usage of the balance for weighing materials.
Details actions that should be avoided to prevent damage or incorrect readings.
Outlines conditions under which warranty claims for the appliance will be voided.
Explains the need for regular checking of balance properties and testing weights for quality assurance.
Emphasizes the importance of reading the manual before setup and commissioning.
States that only trained personnel are allowed to operate and maintain the appliance.
Provides guidelines for selecting an appropriate location to ensure accurate weighing results.
Instructions on carefully removing the balance from its packaging and preparing it for use.
Details on how to level the balance using the foot screws and water balance bubble.
Lists the serial accessories included with the KERN GAB/GAS/FAB models.
Explains how to connect the balance to power via mains adapter or batteries.
Describes the process to get the balance ready for accurate use, including temperature stabilization.
Explains the necessity and process of adjusting the balance to local gravity for accurate measurements.
Details how to check and re-adjust the weighing accuracy using an adjustment weight.
Introduces the concept of official verification for balances used in regulated areas.
Identifies and describes the main physical components and controls of the balance.
Provides a guide to the functions of each key on the balance's keypad.
Explains the indicators and information shown on the display for GAB models.
Explains the indicators and information shown on the display for FAB models.
Covers the practical use of the balance, including turning it on and off.
Step-by-step instructions on powering the balance on and off.
Details how to ensure the balance displays zero for accurate starting measurements.
Explains the process of taring a container to measure only the net weight of the contents.
Provides guidance on safely cleaning the balance without damaging internal components.
States that servicing and maintenance should only be performed by authorized KERN technicians.
Instructs on the proper disposal of the appliance and its packaging according to local regulations.
To Next Page
General
