GAB/GAS/FAB-BA-e-0720
15
Model GAB / GAS Model FAB
Adjustment switch
• The adjustment switch is positioned next to the front foot screw underneath
the balance.
• Press a long blunt object (e.g. pencil lead) in the housing hole.
6.7 Verification
General introduction:
According to EU directive 90/384/EEC balances must be officially verified if they are
used as follows (legally controlled area):
a) For commercial transactions if the price of goods is determined by weighing.
b) For the production of medicines in pharmacies as well as for analyses in the
medical and pharmaceutical laboratory.
c) For official purposes
d) For manufacturing final packages
In cases of doubt, please contact your local trade in standard.
Adjustment switch
To Next Page
Loading...
