770/GS/GJ-BA-defsi-0023 85
1.6 Below Balance Weighing
A port for a below-balance weighing hanger is located on
the bottom of the balance
To open the below-balance port, remove the cover plate
from the bottom of the balance.
To hook a sample on the hanger, open the below-balance
port by removing the cover plate.
Important Note !
When you use below-balance weighing hangers, you must
install a shield for protection against drafts.
1.7 Anti-theft Locking Device
To fasten an anti-theft locking device, use the lug located on
the rear panel of the balance.
To Next Page
Loading...
