KERN PFB 6000-1 User Manual

PFB-BA-e-1322 25
7 Controls
7.1 Keyboard overview
Buttons specification:
Key Designation Pressed once and released
[ON/OFF] Turn on/off
[ZERO] Set weight display at zero
Activate the current element in the menu
Select in Weighing units (menu F UNIT):
change to the next unit
[TARE] Taring
[%] Call-up %-function
In the percent mode back to weighing mode
Only % function
[PCS] Call-up parts counting mode
In the piece count mode back to weighing mode
[MODE] Weighing units switch-over;
At weighing unit switch-
Set weighing unit on/off
Counting up in parts counting mode
Select menu and pass through menu items
from top to bottom
Changing readability
[PRINT/ESC] Print out weighing result
Exit menu (jumping back to weighing mode)

KERN PFB 6000-1 Specifications

General

Model	PFB 6000-1
Category	Scales
Capacity	6000 g
Readability	0.1 g
Reproducibility	0.1 g
Pan Size	Ø 150 mm
Plate Material	Stainless steel
Protection Class	IP65
Operating Temperature	10 °C / 40 °C
Material	Stainless steel

Summary

Technical Data

Basic Information (General)

Proper Use

Improper Use

Lists actions that can damage the balance or yield incorrect results.

Basic Safety Precautions

Pay Attention to Instructions in Operation Manual

Emphasizes reading the manual before operation, even for experienced users.

Personnel Training

States that only trained personnel should operate and maintain the appliance.

Unpacking, Setup and Commissioning

Installation Site, Location of Use

Details environmental and physical conditions for optimal balance placement.

Placing/ Remove the Transportation Lock

Instructions for removing the transportation lock for correct horizontal installation.

Mains Connection

Explains how to connect the balance to the power supply using the mains adapter.

Initial Commissioning

Describes the initial steps for setting up the balance, including warm-up time.

Adjustment

Explains the necessity and purpose of adjusting the balance to local gravity.

Adjusting

Procedure when Adjusting (Non-verifiable models)

Adjustment Procedure (Models PFB-M)

Linearization

Linearization Non-verifiable models (low resolution)

Linearization of Non verifiable models (low resolution) and verifiable models

Table Linearization Points

Verification

Controls

Keyboard Overview

Explains the function of each key on the balance's keyboard.

Overview of Display

Describes the meaning of different symbols and indicators on the balance display.

Operation

Simple Weighing

Guides on performing basic weighing operations for different models.

Taring

Explains how to tare the balance to exclude the weight of containers.

Parts Counting

Details how to use the balance for counting identical parts.

Adding

Percent Weighings

The Menu

Error Messages

Err 3 Incorrect Adjusting Weight

Identifies and explains the error for incorrect adjustment weights.

Err 4 Zero Range Exceeded

Identifies and explains the error when the zero range is exceeded.

Err 5 Keyboard Error

Err 6 Electronic Error

Transportation Lock

Service, Maintenance, Disposal

Cleaning

Instant Help