To Next Page

To Previous Page

CHAPTER 3. LECTRICAL CONNECTION

Thisovenmustbeinstalledandconnectedtoitsplacecorrectlyaccordingtomanufacturer

instructionsandbyanauthorizedservice.

Appliancemustbeinstalledinanovenenclosureprovidinghighventilation.

Electrical connectionsof theappliance must bemade onlyviasockets havingearth

systemfurnishedincompliancewithrules.Contactanauthorizedelectricianifthere

is no socket complying with the earthed system at where appliance will be placed.

Manufacturingcompanyisbynomeansresponsiblefordamageresultingfromconnection

ofnon-earthedsocketstoappliance.

Plugofyourovenmustbeearthed;ensurethatsocketfortheplugisearthed.Plugmust

belocatedinaplacethatcanbeaccessedafterinstallation.

Yourovenhasbeenmanufacturedas220-240V50/60Hz.ACpowersupplycompliant

andrequires a16Ampfuse. Ifyourpower networkisdifferentthatthese indicated

values,refertoanelectricianoryourauthorizedservice.

Whenyouneedtoreplacetheelectricalfuse,pleaseensurethatelectricalconnection

ismadeasfollows:

• Phase(toliveterminal)browncable

• Bluecabletoneutralterminal

• Yellow-greencabletoearthterminal

Ovendisconnectingswitchesmustbeinanaccessibleplaceforfinaluserwhileoven

isinitsplace.

Powersupplycable(plugincable)mustn’ttouchhotpartsoftheappliance.

Ifsupplycord(plugincable)isdamaged,thiscordmustbereplacedbytheimporter

oritsserviceagentoranequallycompetentpersonneltopreventahazardoussituation.

Kernau KBO 0945 PT B User Manual

Questions and Answers: