Kernau KBO 0945 PT B User Manual

EN
72
INSTALLING AND REMOVING WIRE RACKS
Toremovewireracks,presstheclipsshownwitharrowsinthefigure,firstremovethe
lower,andthantheuppersidefrominstallationlocation.Toinstallwireracks;reverse
theprocedureforremovingwirerack.
REPLACING OVEN LAMP
WARNING:
Toavoidelectricshock,ensurethattheappliancecircuitisopenbeforechangingthe
lamp.(havingcircuitopenmeanspowerisoff)
• Firstdisconnectthepowerofapplianceandensurethatapplianceiscold.
• Removetheglassprotectionbyturningasindicatedinthefigureontheleftside.
Ifyouhavedifficultyinturning,thenusingplasticgloveswillhelpyouinturning.
• Thenremovethelampbyturning,installthenewlampwithsamespecifications.
• Reinstallglassprotection,plugthepowercableofapplianceintoelectricalsocket
andcompletereplacement.Nowyoucanuseyouroven.
Type G9 Lamp Assembly:
Type E14 Lamp Assembly:
220-240 V,
AC
15-25W
220-240 V,
AC
15W
FIGURE 13 FIGURE 14

Kernau KBO 0945 PT B Specifications

General

Brand	Kernau
Model	KBO 0945 PT B
Category	Oven
Language	English