EasyManua.ls Logo

Kernau KFC 6008 GE X - Chapter 9. What to Do in Case of Failure

Kernau KFC 6008 GE X
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
74

Ifanyunexpectedsituationhappens,youshould:
Turntheapllianceoff.
Cutofftheelectricalconnection.
Somesmallfailurescanberepairedbytheuser.
Pleasefollowtheinstructionsbelowbeforecallingtheservice:
  
Appliancedoesnotwork. Poweriscut. Checkindoorfuses.
Theburnerdoesnotcatch
fire.
Soiledflameholes.
Cutoffthegasinlet,turnthegas
knobsto„0”position,ventilatethe
room,removetheburnerandclean
theflameholes.
Thegasigniterdoesnot
work.
Poweriscut. Checkindorfuses.
Gasiscut. Turnonthegasinlet.
Soiledgasigniter. Cleanthegasigniter.
Gasknobispressedtooshort.
Presstheknobuntilltheflamewill
notcovertheentirering.
Theflameisputtingout
duringtheignition.
Thegasknobisreleasedto
fast.
HoldtheknobinFULLFLAME
positionlonger.
Interiorilluminationdoesnot
work.
Damagedorincorrectly
installedlightbulb.
Installorreplacethelightbulb
(seeCleaningandmaintance).
Thecontrollampdoesnot
work.
Thecontrollampturnsoff
automaticallywhenthe
ovenreachedthesetted
temperature.
(SeeControllamps).
Theovendoesnotheating.
Thefunctionknobandthe
thermostatknobwasnot
setted.
Settheknobfunction,setthe
thermostatknob(seeOvenUsage).
Ifthefailurewasnotrepaired please cut offtheaplliancefrom power supply system and call the
service.Allmaintenanceandadjustmentsshouldbedonebyqualifedpersonelonly.

Table of Contents