Colposcope Digital Imaging System
43
Chapter VII Troubles shooting
Description Possible causes and treatment
Can not start computer
1. check the cable is in good condition and is in good
contact with both the instrument and power socket
2. Check the computer power mangled or not
Black screen and alarm
after startup
1. Memory bank mangled or not well-inserted
2. Memory or mother board broken
Unworking or startup
circularly after open
computer and enter into
window
1. Fan of CPU not installed properly or engine of fan
mangled
2. unstable power
No signal on the screen
1. not open display
2. not open computer
3. Signal cable of power not well-inserted
Black screen after open
vidicon’s lens
1. Make a mistake in Driver of collection card SDK-3000
2. Cable between lens and mainboard not well-connected
3. Open too much software
Not print
1. Cable of printer well-connected or not
2. lack of paper
3. Choose type of printer rightly or not
Software can not work
normally
1． Had not registration
2． Decoder is not installed
Camera can not control
1． Control line broken
2． COM in mother board not link well
No images in Analysis
1． Had not build "new patient"
2． Had not take new picture
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
To Next Page
Loading...
