Colposcope Digital Imaging System
15
3.2.2 Connection of hardware and software
Please refer to installation manual.
3.2.3 AC power connection
l Insert the three core power cord into the device's AC power socket, and insert the
plug end into the removable porous three-core power socket matching the device.
l Insert the removable porous three-core power plug into the AC220V 50Hz three
core AC power outlet To ensure reliable grounding.
NOTE: ——Equipment must be individually connected to the plug, the plug can not
be shared with other electrical equipment. In the areas that voltage is
instability ,please use the regulated power supply.
——electrical equipment that are not stated should not be connected with
the apparatus.
——Instruments should be placed in easy vibration or shaking place.
——Enough space around the instrument is left to ensure the normal
ventilation of the equipment.
——Normal working conditions should be required when device is running.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
To Next Page
Loading...