To Next PageTo Next PageHow to fix motor fault on Kessel Comfort Control Unit?
If the Kessel Control Unit displays 'Motor fault', it could be because the 'Motor' control cable is either not connected or broken during initialization, or the cable is faulty during operation. Remove the mains plug and disconnect the battery. Check the control cable for correct connection or any breaks. Replace the motor if necessary.
Why does Kessel Comfort display max no. of runs?
If the Kessel Control Unit displays 'Max no. of runs', it means the pump is starting up too frequently at short intervals. Check the system design, and if necessary, contact Customer Services.
What does max relay cycles mean on Kessel Comfort?
If the Kessel Control Unit displays 'max. Relay cycles', it indicates that the maximum switching cycles have been exceeded. This can be acknowledged. Inform Customer Services as the fault will reappear after another 1000 operating cycles.
General| Brand | Kessel |
|---|---|
| Model | Comfort |
| Category | Control Unit |
| Language | English |
Standard welcome message and feedback request.
Overview of the control unit's function and basic components.
Specifies permissible and impermissible applications for the control unit.
Defines requirements for personnel operating or installing the unit.
Outlines necessary organizational safety procedures and site management.
Identifies potential hazards like electric shock and material damage.
Step-by-step guide on securely mounting the control unit housing.
Step-by-step guide for initial setup and configuration.
How to power up the control unit and the initial self-test.
Procedure for safely shutting down the control unit.
Steps to clear active alarms and indicators.
Displays real-time sensor readings like voltage, temperature, level.
Configuration settings for various operational parameters.
Options for manual and automatic maintenance scheduling and tracking.
Configuration of communication parameters like station name and modem type.
Selection of the display language for the unit.
Procedures for resetting the control unit to factory defaults.
Options for data exchange via USB, like reading data or software updates.
Instructions for modifying cable lengths, including ordering extensions.
Procedures for updating software and retrieving data from the unit.
A comprehensive list of errors, their causes, and solutions.
Details on extra features like the "Sleep-Modus".
