12 13
BREW YOUR FIRST KCUP® POD BREW YOUR FIRST KCARAFE
™
POD
1. Place a mug on the Drip Tray.
Select a K-Cup
®
pod, place firmly in
the Pod Holder.
NOTE: Do not remove the foil lid or puncture the K-Cup
®
pod.
1. Make sure the Keurig
™
Carafe is empty.
Remove the Drip Tray and insert the
Keurig
™
Carafe securely in its place.
NOTE: Do not remove the foil lid or puncture the
K-Carafe
™
pod.
NOTE: Refer to page 22 for Keurig
TM
Carafe operation.
3. Select a Brew Size. Select STRONG if
desired. (STRONG setting is for coffee.)
3. Select a Brew Size.
NOTE: Make sure the number on the Touch Display matches
the number of the K-Carafe
™
pod you’re brewing in the
Pod Holder.
Press HOT COCOA/OTHER for select
cocoa and other beverages as noted on the
instructions on the K-Cup
®
pod packaging.
2. Lower the Handle.
CAUTION: There are sharp needles that puncture the K-Cup
®
pod above and below the Pod Holder. To avoid injury, do not put
your fingers in the Pod Holder.
2. Select a K-Carafe
™
pod, place firmly in
the Pod Holder and lower the Handle.
CAUTION: There are sharp needles that puncture the
K-Carafe
™
pod above and below the Pod Holder. To avoid
injury, do not put your fingers in the Pod Holder.
4. Press the Brew Button and enjoy your
first cup!
CAUTION: There is extremely hot water in the K-Cup
®
pod
during the brew process. To avoid injury, do not lift the Handle
during the brew process.
4. Press the Brew Button and enjoy
your first carafe of coffee!
CAUTION: There is extremely hot water in the
K-Carafe
™
pod during the brew process. To avoid injury,
do not lift the Handle during the brew process.
Carafe Sold Separately
Brewer only works with Keurig
™
Carafes. To purchase a Keurig
™
Carafe please visit Keurig.ca
1
|
LET’S GET BREWING!
To Next Page
Loading...
Need help?
General
