NIGHT LIGHTS
connected appropriately.
The Night Light System switches the lights on or of 15 minutes
after the set threshold is exceeded. This delay is to prevent false
To customise, proceed as follows:
switch-on or switch-off due to external light sources such as car
headlights.
PARAMETERS DESCRIPTION DEFAULT MIN. MAX. UNIT
1
AUTOMATIC LIGHT
0 = Night Light System deactivated
1 = Night Light System active (automatically activated
light connected)
0 0 1
2
LIGHT INTENSIVITY
1 to 5 = Brightness at which LEDs switch on during the
night
3 1 5
3
EXTERNAL LIGHT
LEVEL
1 = Light sensor tripped with low outdoor light
2 = Light sensor tripped with medium outdoor light
3 = Light sensor tripped with bright outdoor light
2 1 3
9
MOTOR 2
DELAY
Leaf 2 opening delay with gate closed
0 - 60 sec.
2 0 60 s
10
SLOW DOWN
LENGTH
Deceleration distance
0 = Programming decelerations
1 to 100 = Motor deceleration percentage during
opening and closure
0 0 100
% (step
of 1)
11
ENERGY SAVING
Energy saving: enables photocell switch-off when gate
is closed
0= disabled
1= enabled
0 0 1
14A
NIGHT LIGHTS
24
To Next Page
Loading...